Recommended Rear Suspension System For 2013 Toyota 4Runner For Towing And Off-Road Use
Updated 09/20/2016 | Published 09/18/2016 >
Products Featured in This Question
Question:
My 2013 4Runner SR5 will be used to tow a 2300lb empty to 5000lb loaded trailer for on-highway towing. We will also use this vehicle for occasional off road use without towing the trailer. Which Timbren System would give me the most benefit? Does the Active-Off Road System do everything the Enhancement System does and more? I have watched videos, read product descriptions and dont know what to buy for my dual use application. 2013 Toyota 4Runner Timbren Rear Suspension Enhancement System Code: TTORSEQ or Timbren Active Off-Road Bumpstops - Rear Suspension - 2,000 lbs Code: TABSTORSEQ
asked by: Tim
Expert Reply:
If you are planning on off-road travel with your 4Runner, I recommend the Timbren Active Off-Road Bumpstops, part # TABSTORSEQ.
These are designed to cushion the ride of your truck and absorb the shock when bottoming out when you are off-road as you said or when there is a load on the rear of your truck. When you install the Timbrens, the instructions state you want between 1/2 to 1-1/2 inches of clearance between the rubber spring and the contact point on your truck. This means you will not effect the ride when the truck is empty. As more weight is added to the rear of the truck the springs cushion the load and help reduce the hard jarring or bouncing you may get with factory bump stops. The # TABSTORSEQ has a 2,000-lb capacity and will not increase the load-carrying capacity of your truck.
The # TTORSEQ Timbren system has a 6,000-lb capacity and becomes more rigid when placed under a heavy load. This system is designed to be used primarily when you are placing heavier loads on the back of your truck.
I recommend going with the # TABSTORSEQ that is designed to help smooth out the ride of your truck when off-road, and will also help when towing and adding weight to the rear of your truck.
Product Page this Question was Asked From
Timbren Active Off-Road Bumpstops - Rear Suspension - 2,000 lbs
- Vehicle Suspension
- Off-Road/Performance
- Bump Stops
- Suspension Only
- Light Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Recommended SumoSprings Air Helper Springs that fit a 2024 Lexus GX 550 Overtrail
- Q&A: Availability Of Replacement Rubber Springs For Timbren Axle-Less Trailer Suspension
- Q&A: Recommended Suspension Enhancement for a 2019 Ford F-150 Raptor
- Q&A: Will the SumoSprings Solo Helper Springs Fit My 2018 Ford F-150 Raptor with 4 Inch Lift Kit?
- Q&A: Timbren Rear Suspension Springs and Bump Issue on 2019 Ford F-150 Raptor
- Q&A: Are There Replacement Parts Available for the Motor in the Lippert Electric Tongue Jack 285318
- Q&A: Weight Distribution for a 2014 Toyota 4Runner and 4,200 Pound Travel Trailer
- Article: Stability Control for Heavy Duty Vehicles
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams


