Longer Strap Recommendation for Yakima Forklift For Wider Wheels/Tires

Question

Question:

Looking to replace the OEM strap with something longer to accommodate my 4.6inch on my Forklift. I have the ForkUp adapter up front but still need to secure the rear wheel.

asked by: Jon

0

Expert Reply:

I spoke to my contact at Yakima and he informed me that the # Y8880229 is compatible with the Forklift to accommoadate wider rimmed bikes.

expert reply by: Jameson C

0

Answer 1

Please see below for our full list of replacement products for the Yakima FourTimer #Y02469 Bike Platform Rack. Replacement "A" Wheel Tray Assembly for Yakima TwoTimer and FourTimer Bike Racks - Qty 1 #8880796 Replacement "B"…

view full answer...

Answer 2

Part #Y8880229 was designed for the other hitch racks, and frustratingly, the TwoTimer has its own strap. Its available as part #Y02470 and comes 2 straps.

view full answer...

Answer 3

In order to replace the wheel straps, you will want to use the Straps for Yakima TwoTimer part #Y02470 which are a fit for the Yakima FourTimer Bike Platform Rack part #Y02469.

view full answer...

Answer 4

For the least amount of wind resistance, I would recommend installing a roof cargo box towards the rear of the vehicle. The only problem with moving the cargo box towards the rear on a minivan is you will want to make sure that the cargo box will not…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Longer Strap Recommendation for Yakima Forklift For Wider Wheels/Tires

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching