Max Frame Width Blue Ox Sway Pro Weight Distribution System Can Attach To

Question

Question:

Im sizing up the Blue Ox BXW2000. I need to know the trailer frame width that the clamp lift bracket can span across. Or what is the max width of the trailer frame the clamp on type can handle?

asked by: Alton L

0

Expert Reply:

The brackets of the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW2000 that you referenced can clamp on to trailer frame widths of up to 2-1/2 inches.

I attached a review video for more info as well.

expert reply by: Jameson C

0

Answer 1

Hello Roy, thanks for reaching out. We do have the 225/75-15 tires but nothing G rated. Our highest rating in that size would be the E range tires you have now. So we would not have a good tire upgrade option for you. As far as the blowouts, are you…

view full answer...

Answer 2

No, it does not but there are a couple of options to make them work with a 2-1/2" receiver. The Blue Ox SwayPro Weight Distribution item #BXW1006 and item #BXW1000 are only sold with 2" shanks. The least expensive option is to use the Curt…

view full answer...

Answer 3

Hey Edwin! If the listed dry tongue weight is 1,330 lbs you will likely be over the rating of your current SwayPro spring bars. You'll probably be adding 150-200 lbs with the propane and batteries, but that does depend on the number of propane…

view full answer...

Answer 4

Hey Michael! When you're choosing a weight distribution hitch the most important factor is the tongue weight of the trailer. It looks like the dry/unloaded tongue weight of a Brinkley Z Air 297 is 924 lbs. Once you add batteries and propane you…

view full answer...

Answer 5

With your tongue weight at 1,175 lbs when loaded, you also need to account for any cargo weight behind the rear axle as well to get the total tongue weight rating. I've attached an article to assist. You are correct that your current system is…

view full answer...

Answer 6

The B&W Tow & Stow 2-Ball Mount #BWTS20037B referenced in your question features a 18,000 pound towing capacity when used with the 2-5/16 inch ball so it certainly has the capacity needed to tow a 13,500 pound trailer. This is designed to fit…

view full answer...

Answer 7

Hello Robert, It sounds like you may be experiencing a bit of white-knuckle towing, which is never enjoyable. When a trailer doesn’t want to track straight, it can make every mile feel longer than it should. I do recommend a weight distribution…

view full answer...

Answer 8

Hey Elliot, the B&W Continuum Weight Distribution #BW78FR that you referenced does have sway control but it's not as specific as other systems. Basically B and W's philosophy is that a properly balanced trailer using a superior weight…

view full answer...

Answer 9

An underslung trailer coupler is one that attaches to the bottom of the trailer frame and an overslung one is one that attaches to the top of the frame. The Replacement Head for Blue Ox SwayPro Weight Distribution Systems part #BXW4011 is for…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Max Frame Width Blue Ox Sway Pro Weight Distribution System Can Attach To

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching