How to Clean Rust/Corrosion from Frame Weld Nuts on 2008 Toyota RAV4 for Hitch Installation

Updated 07/08/2016 | Published 07/07/2016

Products Featured in This Question

Battery Post and Terminal Cleaner - Wire Brush

(15)

$4.72

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(914)

$191.96

Question:

Ordered a Curt Class III Round Tube Receiver Hitch - 2008 Toyota RAV4 and it arrived. Tried to install tonight and the bolt holes are really rusted up. A brush did not clean out the screw in hole enough to get a bolt even started. I was thinking of running a tap through the bolt hole. What size is the bolt? What do you suggest? Thanks

asked by: Chase M

Expert Reply:

I suggest you try a brass tube brush and a healthy dose of WD40 or PB Blaster on your rusted weld nuts. We also offer a wire brush # DW00254. You may need to use multiple applications of the lubricant, and allow time for it to soak in overnight, before using the brush.

If you use a tap you could alter the fit of the hitch hardware which could affect the hitch's actual capacity, so I recommend using the lubricant/brush several times. Please refer to the linked video and article on hitch installation.

expert reply by: Adam R