bing tracking image
Q & A Icon

Is Roadmaster XL Base Plate Kit Compatible with Stowmaster Tow Bar  

Updated 06/02/2016 | Published 05/31/2016

Question:

I just ordered the Roadmaster XL Base Plate Kit, item # 1012-1 for my 1999 Chevy Tracker. I have a roadmaster stowmaster 5000 did I order the correct base plate kit to use with my stowmaster 5000?

1

Helpful Expert Reply:

Yes, the Roadmaster XL base plate kit part # 1012-1 that you referenced is compatible with the Stowmaster 5000 tow bar part # RM-501 that you have. The removable arms of the base plate kit would easily attach to the crossbar of the tow bar.

For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest system to set up and use is the Blue Ox Patriot # BLU37TR, that applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
1
Jameson C

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>