Fit of Curt D210 Multipurpose Ball Mount With C13240 Class III Hitch on 2016 Hyundai Tucson

Updated 05/03/2016 | Published 04/30/2016

Products Featured in This Question

Curt Multipurpose Ball Mount with 2" Receiver for Bike Racks and Cargo Carriers - 7,500 lbs

(236)

$73.69

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(458)

$213.26

Question:

Will your Curt Multipurpose Ball Mount with 2inch receiver 45810 fit on a 2016 Hyundai Tuscon? Im concerned with there being enough room between the bumper and the back of the top receiver. We got the Curt hitch for this car. Thanks

asked by: Jane S

Expert Reply:

You can easily determine if the # D210 will fit. Locate the hitch pin hole, and measure rearward from the center of the hitch pin hole until you clear the furthest rearward edge of the back bumper. If this distance is less than 5 inches, the # D210 will work just fine for you. When we installed the Curt Class III hitch, part # C13240 on a 2016 Hyundai Tucson, we found the hitch pin hole to rear of bumper measurement to be 3-1/2 inches, which means the # D210 would work perfectly.

expert reply by: Mike L