Which Torklift Weight Distribution Shank Works with Reese WD Heads

Updated 04/22/2016 | Published 04/19/2016

Products Featured in This Question

Adjustable Shank for TorkLift SuperHitch Trailer Hitches - 12-1/2" - 20,000 lbs

(7)

$437.83

Adjustable Shank XL for TorkLift SuperHitch Trailer Hitches - 17-1/2" - 20,000 lbs

(1)

$472.29

Adjustable Shank XL for TorkLift SuperHitch Everest Weight Distribution - 17-1/2" - 30,000 lbs

(4)

$472.29

Question:

I have a TLM9000 on order to use with my SuperHitch. My plan is to use it with my Reese SC WD Hitch 15,000 lb. In another e-trailer q/a, I saw someone say the hole spacing is not correct. The e-trailer response was to use the Everest WD system with the SuperHitch. My question is, can you verify the hole spacing on both the TLM9000 and the RP58167? The whole point of TLM9000 is to use other manufacturers WD heads. The Everest system is not what I need, however I really like the TLM9000. Thanks.

asked by: Robert K

Expert Reply:

I checked with Torklift and the # TLM9000 and # TLM9001 are designed to fit the standard weight distribution systems like your Reese. It has the 3/4 inch holes and the distance between them of 1-1/4 inches.

Some of the Torklift shanks use larger diameter holes and would not work with a Reese head but this one does.

The part # TLM9011 is an example of a shank that would not work with a Reese head.

expert reply by: Jameson C