7-Way, 4-Way and Brake Controller Recommendation for a 1995 Ford Bronco

Updated 04/11/2016 | Published 04/08/2016

Products Featured in This Question

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(5)

$32.03

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2776)

$158.63

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3417)

$127.95

Question:

Im wanting to add a 7 way blade trailer plug with a 4 way blade also on a 95 ford bronco also wanting to hook up trailer breaks can you tell me exactly what I need? It has tow package and already has a Hopkins light kit on it but it needs replaced I looked at the wiring harness you offer for bronco but what do I have to do to hook up break controller and 7 way with 4 way also

asked by: Doug T

Helpful Expert Reply:

You will need to start with a 4-way (if you do not have one in working order). For that you would want the # C55350.

From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit and 7-Way Adapter part # ETBC7. I attached installation instructions and an install video for this product as well. The connector has both a 7-way and a 4-way connector on it.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by: Jameson C