Trailer Coupler Recommendation for a 2 inch Channel for a 1-7/8 inch Hitch Ball
Updated 12/01/2015 | Published 11/29/2015
Question:
I have a 2inch trailer coupler on a log splitter that I just bought that I will pull with my ATV. All of my other implements use a 1 7/8 ball. I would like to replace the 2inch coupler with a 1 7/8 coupler that has the same bolt pattern. Is that available ? Hole spacing between bolts is approx 3.
asked by: Jim
Expert Reply:
For a coupler to fit a 2 inch channel that will work with a 1-7/8 inch hitch ball you would want something like the part # E112000340. Since the mounting holes aren't 3 inches apart you will need to have this coupler welded to the trailer instead since none of the options we have 3 inches between the mounting holes.
Since this coupler is galvanized you will need to do all welding in a well ventilated area.
Product Page this Question was Asked From
Fulton Fas-Lok Coupler, 1-7/8" Ball, 2" Channel - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 2 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- Fulton
more information >
Continue Researching
- Q&A: What Kind Of Bushings Does The CE Smith Triangular Equalizer CES86WR Have?
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: Will The Fulton Coupler E112000340 Bolt Onto The CE Smith Extra Long Tongue CES45FR
- Q&A: What Is the Speed Rating on the Yakima Rack N Roll Trailer
- Article: What Do I Need To Tow A Trailer?
- Article: Hand Winches
- Q&A: How to Convert Trailers Air Brakes to Electric Brakes
- Q&A: What Hardware Should I Use For The Demco Channel Tongue Trailer Coupler DM15945
- Q&A: Recommended Roof Rack For A 2023 Ford F-150 Lightning
- Q&A: Recommended Load Range C 4.80-12 Trailer Tire w/a 12" Galvanized Wheel
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams