Recommended Converter To Convert Combined Wiring On Vehicle For Trailer With Separate Wiring
Published 09/02/2015 >
Products Featured in This Question
Question:
All the non-splice vehicle wire kits come out as a 4 wire harness. My vehicle is a 2014 Honda Civic EX sedan - non-Hybrid. Installed the Curtis wiring kit to rear lights as directed. My trailer uses full right turn, left turn, brake lights and are not combined like on many 4-wire trailers right/brake, left/brake, running lights, and ground. I dont want to splice into the car wires. Is there a converter module that uncouples the right/brake, left/brake signal to output individual signals that I can plug my 5-wire trailer into? Your #20036 and #47515 both require splicing. And, I would not be using the reverse signal from the car, but the brake signal. Perfect world - Car - Curtis 118420 wiring/protection module - 4 wire - 4/5 wire converter-Male 5 flat - W787264 5 wire - Waterproof male/female connectors - DW04906-1 to trailer female PK11609. Ive seen on YouTube someone with a schematic to do the conversion, but schematic is not really readable I thought maybe there is one made commercially, or your team would have an idea.
asked by: Page G
Helpful Expert Reply:
We do have a converter that will let you convert the combined brake and turn signals from your Honda without splicing into the vehicle wiring. The wiring would be done on your trailer.
I recommend part # 118158. You would cut the harness on your trailer and wire it to the 118158 converter as shown in the attached photo. Since it is not waterproof, you will need to use a junction box on the trailer like part # 38656.
You would need to use a 4-way trailer-side connector like part # HM48110 on the vehicle side of the converter.
Product Page this Question was Asked From
Adapter 4-Pole to 5-Pole Trailer Wiring Adapter - Shorter
- Custom Fit Vehicle Wiring
- Wiring Adapters
- Universal Fit
- 4 Flat to 5 Flat
- Plug and Lead
- Hopkins
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Vehicle Tow Bar Wiring
- Shop: 2-to-3 Tail Light Converter for Towed Vehicles w/ Incandescent Tail Lights
- Shop: Roadmaster Brite-Lite 3-to-2 Tail Light Converter for Towed Vehicles
- Search Results: turn signal converter
- Shop: Trailer Wiring
- Shop: Curt Tail Light Converter with 4-Way Flat Trailer Connector
- Search Results: back up alarm
- Video: Hopkins 7-Way Molded Trailer Wire Connector Spec Review
- Video: In-Depth Review of the Buyers Products Self-Grounding Back Up Alarm
- Shop: Bargman 7-Way, RV-Style Connector w/ 10' Heavy Duty Insulated Cable - Trailer End
- Shop: Bargman 7-Way, RV-Style Connector w/ 6' Heavy Duty Insulated Cable - Trailer End
- Shop: Hopkins 7-Way Molded Trailer Wire Connector - 11' Long
- Shop: Hopkins 7-Way Blade Style Connector with Molded Cable - Trailer End - 8' Long - Auto Standard
- Q&A: Will the Hollywood Racks Crosstrack Bike Rack for 1 Bike Work with Fenders?
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Wiring Trailer Lights with a 5-Way Plug (It's Easier Than You Think)
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Q&A: Can Demco Hydraulic Brake Actuator DM72VR Replace Atwood 61101?
- Q&A: Can a 5-Way Adapter Work with a Trailer 4-Way Connector
- Q&A: Trailer Brakes Lock Up when Trailer is Plugged into 2015 Nissan Xterra
- Q&A: 7-Way Trailer Wiring Connector for 2011 Nissan Pathfinder Towing Boat Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Bleed Your Trailer Surge Brakes
- Article: Printable Trailer Bolt Hole Pattern Template
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)




