Weight Distribution for 2 Horse Trailer Weighing 3,200 to 4,200 Pounds
Question:
I like the hitch the design and the price. However my question is: My 2 horse trailer has Empty weight of 2200 lbs. So when I pull one horse the Trailer w will be some 3200lbs and when I pull two it shall be 4200 lbs or so. So my question is this hitch ok for me. My Truck can pull 10000 lbs
asked by: Vijay V
Expert Reply:
To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
Tongue weight is typically 10 t0 15 percent of the gross trailer weight (but could be more). For a trailer weighing 3,200 pounds to 4,200 pounds the tongue weight range should be around 320 to 630 pounds. A system rated for 1,000 pounds tongue weight would be too heavy for this amount of tongue weight.
To cover most of that range you can use Reese system # RP66540 which is rated for 200 to 600 pounds tongue weight. Then, to add sway control, you would just need sway control, # 83660, and a properly sized ball such as # A-90 for a 2 inch or # 19286 for a 2-5/16 inch.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt MV Weight Distribution System - Round Bar - 10,000 lbs GTW, 1,000 lbs TW
- Shop: Curt MV Weight Distribution System w/ Friction Sway Control - Round Bar - 14K GTW, 1.4K TW
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Which Mirror Monitor Will Work With The Rear View Safety Backup Camera System # RVS-770613-213?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Timbren Suspension Enhancement Options For A 2023 Toyota Tundra TRD PRO
- Q&A: Length of Spring Bars on the Curt TruTrack 2p Weight Distribution System # C69JR
- Q&A: Base Dimensions of Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout
- Q&A: Comparing Blue Ox 2-Point and Curt TruTrack 2P Weight Distribution Systems for a FR Wolf Pup 17JG
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)