Replacement Remote Coupler Engagement Cable System for Ranch Hitch Coupler Adapter # AM3100

Question

Question:

was wondering if you offer a replacement kit for the cable to release the lock on ball

asked by: Philp

0

Expert Reply:

We do offer a replacement release cable kit for the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter # AM3100. The Replacement Remote Coupler Engagement Cable System is part # AM3112.

expert reply by: Adam R

0

Answer 1

The whole engagement cable assembly is available, #AM3112, but not the cable part by itself. Replacing the whole assembly would be the preferred method though because there could be something damaged or out of sorts internally that you can't…

view full answer...

Answer 2

I mean theoretically speaking if the plate mates up perfectly to your current coupler you could use the Replacement Remote Coupler Engagement Cable System for Ranch Hitch Adapter #AM3112 work with your older 2-bolt plate, however with two bolts…

view full answer...

Answer 3

I went out to the warehouse to check out the latching mechanism on the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler, item #AM3139, an found that the cable used to release the coupler from the gooseneck ball is attached to an anodized steel…

view full answer...

Answer 4

For a replacement cable for your Ranch Hitch Adapter, you will need the Replacement Remote Coupler Engagement Cable System, #AM3112. This includes the cable, handle and 4-bolt plate that attaches to the adapter.

view full answer...

Answer 5

Hello Daniel, thanks for reaching out. Is there a specific dimension you are looking for? Or are you just trying to determine fitment? I can tell you the Shocker #SHK89YR fits Lippert 1716, 1116, 0115, & Fabex pin boxes. It has a 3" offset.…

view full answer...

Answer 6

Hey Dennis. We've got a couple different versions but the Shocker Hitch 5th Wheel to Gooseneck Coupler Kit w/ Demco eZ-Latch for Lippert Turning Point item #SHK29YR you were looking at will only fit 5th wheel trailers that have a Lippert or Curt…

view full answer...

Answer 7

Hey Rick. We have the upgraded model with the air bag that fits a Lippert 1621HD bolt pattern. It's the Shocker Hitch 5th Wheel to Gooseneck Coupler Kit w/ Demco eZ-Latch for Lippert and Rhino Box - 24K item #SHK99YR. Almost an identical setup to…

view full answer...

Answer 8

The reason the Convert-A-Ball Cushioned 5th-Wheel-to-Gooseneck Adapter #CAB-C5G is not recommended for use with factory-installed gooseneck prep packages on Fords from 2011-present and Ram from 2013-present is because they use a gooseneck ball that…

view full answer...

Answer 9

For your 2016 Ram 3500 with the CM Flat Bed I recommend using the Ranch Hitch Universal 5th-Wheel-to-Gooseneck Coupler Adapter #AM3100. This will attach to the 5th wheel pin box and convert it to be used with your gooseneck ball. You will not need an…

view full answer...

Answer 10

Hello Joe, thanks for reaching out. The Demco #DM8550046 you mentioned is for a flatbed truck with a recessed gooseneck ball so this would not work for your setup. Instead what you will want is the following: - Demco Recon Gooseneck-to-5th Wheel…

view full answer...

Answer 11

Thanks for the pictures! I have a solution for you but you'll need to take a closer measurement. I can't tell exactly where the tape measure ends due to the angle but if your recess well is 4" deep or less I recommend using the B&W…

view full answer...

Replacement Remote Coupler Engagement Cable System for Ranch Hitch Coupler Adapter # AM3100

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching