Changing a 7-Way Trailer Side Connector to a 4-Way Trailer Connector
Updated 04/08/2015 | Published 04/07/2015 >
Question:
i bought a Hopkins 4 Way Flat Connector and need to change out the 7 way that is on my small camper does not have power brakes on it. Am I okay to simply splice the wires on both sides and connect the matching colors? Will obviously tape off the unused electric brakes, 12 volt, and referse lights. Just wanted to make sure this is okay to do before I start cutting :-
asked by: Mike O
Helpful Expert Reply:
Yes, you can just remove the wires from the trailer's existing connector and attach them to the new 4-Way, # HM48110. Taping off the unused wires will be fine just make sure they are secured so they are not flapping around loose.
On the harness the white striped wire is ground, brown is running lights, yellow is left turn/brake lights, and green is right turn/brake lights.
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer lights
- Shop: Trailer Wiring
- Shop: TowSmart Trailer Connector Adapter - 4-Way Flat to 7-Way
- Video: Install: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension on a 2013 Jeep Patriot
- Video: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension Spec Review
- Shop: Suspension Enhancement
- Shop: TowSmart Plug-In Trailer Connector Adapter - 4-Way Flat to 7-Blade
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Rear Axle
- Shop: Coil SumoSprings Custom Helper Springs for Coil Spring Suspension - Front Axle
- Shop: Vehicle Tow Bar Wiring
- Search Results: 7 wire control module to control brake light and trailer brakes
- Shop: Replacement Anti-Dry Combustion Eco T-Switch for Girard RV Tankless Water Heater
- Video: Feature Breakdown: ONE LED Trailer Tail Light
- Video: Optronics Trailer Lights A16RB Review
- Video: Breaking Down the ONE LED Trailer Tail Light
- Shop: Roadmaster Brite-Lite 3-to-2 Tail Light Converter for Towed Vehicles
- Search Results: 4 flat trailer wiring
- Search Results: adapter 4 way flat to 7 way blade
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Adapter for 4-Flat on Vehicle to Attach to 7-Way Round on Trailer
- Video: Review of TowSmart Custom Fit Vehicle Wiring - Trailer Hitch Wiring - TS37QR
- Shop: Replacement T-Bolt with Nut for Yakima Rack and Roll Trailers - Qty 4
- Q&A: Turn and Brake Lights Do Not Work Using 6-Diode Kit and Converter for Towing a 2012 Cadillac SRX
- Search Results: trailer wiring
- Search Results: adapter
- Search Results: converter
- Video: Review of RV Designer Trailer Wiring - Wiring Adapters - RD58SR
- Article: Trailer Wiring Diagrams
- Q&A: Replacing 6-Way on Trailer With 7-Way Connector
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
