Troubleshooting Key that Wont Turn in a Master Lock Gun Trigger Lock # 90KADSPT
Published 02/18/2015 >
Question:
I have the key but the cylinder will not turn rendering the lock unopenable and its on my gun! Please send advice
asked by: H C
Expert Reply:
Sounds like the tumblers of the Master Lock Gun Trigger Lock # 90KADSPT are being stubborn and aren't letting you unlock it. You should note that the lock cylinder is spring loaded and you must maintain pressure on the key, to hold it in the unlocked position, when removing the lock.
Sometimes dust and dirt collect inside the lock cylinder. When that happens the dirt can cause the pins to stick in a partially raised position, preventing the plug from turning. In most cases a spritz of dry lubricant will be sufficient to free up the plug and allow you to open your door. Simply spray the lubricant into the keyway and insert the key a few times to work the lubricant into the mechanism. If this method does not work you may need to use a more solvent-based lubricant like WD-40 to loosen the dirt. Locks exposed to the elements sometimes collect a lot of dirt.
Product Page this Question was Asked From
Continue Researching
- Q&A: Front Mount Hitch Recommendation for a 2019 Ram 1500 New Body Style
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Parts Needed to Install a Red Arc Brake Controller in a 2023 Toyota Tacoma
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Looking for Bearing Kit for 2020 Grand Design Reflection 303RLS
- Article: How to Measure for Trailer Hitch Drop
- Article: How to Choose the Right Trailer Hitch Class
- Article: Trailer Lighting Requirements
- Article: 5 Things to Know About Weight Distribution Hitches

