Spacers to Install Timbren Front Jounce Springs # TDF25004B on Lifted 2005 Dodge Ram 3500 4 X4

Updated 01/05/2015 | Published 01/03/2015

Products Featured in This Question

Timbren Front Suspension Enhancement System

(715)

$269.36

Timbren 1" Spacer For Raised Frame Vehicles - 3/8" Bushing

(142)

$16.57

Question:

I have viewed the installation video of the Timbren TDF25004B on 07 Ram 2500. I am very impressed with the Timbren product and the benefits of how it extends beyond the factory bump stop and supports the front axle. I own a 2005 Ram 3500 4x4 SRW with a 4inch lift. Does Timbren offer an extended bump stop that will work with a lifted truck so the front axle receives the same support as a factory spec truck ?

asked by: Marshall

Helpful Expert Reply:

In order to install a front axle suspension enhancement such as the Timbren # TDF25004B on a truck with a 4-inch lifted suspension you will need to take a measurement to see if Timbren has a suitable solution to adjust for the truck's lift. Timbren part # A25723-90AH00 is a 1-inch spacer but you cannot use multiples of these; we'll need to check with Timbren once we know a particular measurement.

Measure from the bottom of the frame to the top of the axle (or control arm - whichever applies in your case). Once you know this dimension I can check with Timbren for availability of a suitable kit to address the truck's lift.

expert reply by: Adam R