Custom Fit 2010 Toyota FJ Cruiser Accessories

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

In order to find a replacement you will have to identify what you currently have on the trailer. Since you mentioned the rotor I'm assuming you have disc brakes. If you have an over-the-hub rotor you won't need to replace the entire hub, just…

Installation of a brake controller on your 2007 FJ Cruiser will require hard wiring with a Brake Controller 7- & 4-Way Installation Kit, item #ETBC7. We have detailed instructions, see link, and a video installation, see links, of this kit and a…

Since you're looking for a relatively easy installation and your camper only has a single 3,500 lb axle, your best option is to add electric brakes. These will work well to provide safe and reliable breaking on your fully loaded trailer and do…

If you are getting a trans warning light on your 2007 Toyota FJ Cruiser then that would be something more like low fluid or a leak and not necessarily the temperature. The Derale Temperature Gauge Kit #D13009 requires that a hole be drilled into the…

Even with a wheel that is 1/2 inch wider the section width of the tire will still be the same so there won't be any fit issues. But you mentioned that you have 14 x 5-1/2 wheels now so the product you came from when the question was asked,…

Thank you for the photo with all of your tire info on it. For your spare, I don't have any black wheels that already have a tire mounted. If you'd like to keep with your black wheel theme then I recommend the same tire as part #AM10235 with…

Any given tire size will fit a range of wheel widths. An ST215/75R14 tire such as #TTWTRTM2157514D will fit 14 inch wheels that are 5-1/2 to 7 inches wide so it will work with your 14x5.5 JJ wheels. The 205 size will be slightly shorter and narrower…

The vehicle wiring harness is sold separately from the hitch. For your 2008 FJ Cruiser, you will need the Draw-Tite Class III Trailer Hitch Receiver, item #75461, and the T-One Vehicle Wiring Harness with 4 Pole Trailer Connector, item #118405.

Yes, the Trailer Axle with Idler Hubs #e65GR can be submerged and used on a boat trailer. If this is a replacement axle, make sure your current axle has a 3,500 lb capacity and 89" hub face measurement. You want the capacity and length to match…

Based off of my research, you can use the Replacement Caliper for Titan 10" Brakes #K71-773-02 for the passenger side, and the Replacement Caliper for Titan 10" Brakes #K71-773-01 for the driver's side, will work for you. These come…

For Toyota FJ Cruiser models between 2007 and 2014, I recommend using the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms #1183-1. This will give you custom fit brackets that will allow you to bolt them right on with Loctite #LT37420. Then…