Rhino Rack Roof Rack - RR32GR

This quiet, aerodynamic roof rack with a from-the-factory look lets you carry gear on your vehicle's naked roof. Sturdy, lightweight aluminum crossbars include top channels with noise-reducing Vortex strips. Integrated locks deter theft.

Features:

• Quiet, low-profile roof rack lets you mount carriers and accessories on your vehicle's naked roof
• Slim, elliptical crossbars create an extremely aerodynamic system
• Flush design - bars don't extend past legs so the rack has a streamlined, from-the-factory look
• Top channels let you add channel-mounted carriers and accessories
  • Clamp-on accessories can also be mounted to the bars
• Rubberized Vortex strips in top channels dramatically reduce drag and wind noise
  • Keep dirt and grime out of crossbars
  • Provide cushioning and slip resistance for your cargo
• Lightweight, structural-grade anodized aluminum bars are rustproof
  • Internal H-shaped extrusions provide exceptional bar strength
• UV-treated, glass-reinforced nylon legs are weather resistant
• Built-in locks secure crossbars to roof and secure channel-mounted carriers to crossbars
• Easy, clamp-on installation to door jambs with custom fit kit
  • Custom-cut crossbars match the width of your vehicle's roof without adjustment
  • Padded, metal clamps and rubber pads protect your roof from scratches and abrasions
• Complete system includes 2 crossbars, 4 legs, and fit kit
• Matte black finish

Specs:

• Rack weight capacity: 165 lbs
  • Always observe your vehicle's maximum roof load capacity
• Crossbar dimensions:
  • Front: 49-1/16" long x 3-1/8" wide x 1-3/16" tall
  • Rear: 48-15/16" long x 3-1/8" wide x 1-3/16" tall
• Limited lifetime warranty

The low-profile, aerodynamic Rhino-Rack ROC25 roof rack lets you carry gear and accessories on your vehicle's roof quietly and with little wind drag. It's designed for installation on a naked roof (a roof without factory raised side rails, flush rails, fixed mounting points, tracks, or rain gutters). The rack's Vortex Aero crossbar has built-in rubber strips that disrupt airflow for a quiet ride, and the bar is constructed of aluminum so it won't rust. This bar blends seamlessly with the support legs to provide a from-the-factory look, and it is custom cut to your specific vehicle so it requires no adjustment during installation. The legs also include built-in locks that protect your gear and the rack from theft.

Aerodynamic Design

The rubberized Vortex strips in the top channel of the crossbar disrupt airflow with evenly spaced, wave-shaped grooves. This carefully controlled turbulence minimizes wind noise and whistling, so you won't need to add a fairing to your roof rack. And the slim, elliptical Vortex Aero crossbar cuts through the air with minimal drag - even at highway speeds.

The ROC25 roof rack has a flush-mount design so the crossbar terminates at the legs with no overhang. This provides the rack with a seamless, from-the-factory look, and it also helps to improve aerodynamics by reducing drag and wind noise.

Strong, Durable Construction

The Vortex Aero crossbar is made of structural-grade anodized aluminum with an H-shaped internal extrusion. This extrusion strengthens the bar without adding a significant amount of weight. And the aluminum bar won't rust so you can leave it on your roof year-round.

The rack's durable, glass-reinforced nylon legs are designed to stand up to cargo loads and weather extremes. They're also UV treated to withstand long-term exposure to sunlight.

Custom Fit for Easy Installation

The roof rack arrives at your doorstep almost completely assembled. The crossbar is already mounted into the nylon legs. And the bar is pre-cut to match the width of your vehicle's roof, so you won't need to waste any time centering it. The few remaining assembly steps are straightforward and require only the vehicle-specific fit kit.

The vehicle-specific fit kit includes pads and clamps specifically designed to fit the contours of your roof. To install, simply attach the pivoting plates and rubberized pads to the bottom of each leg. Then secure the legs to your vehicle with the metal clamps. Decals inside the legs and a diagram in the instructions help you to orient the crossbar on your roof.

Once the crossbar is properly positioned, use the included Allen key to tighten it in place. The Allen key is designed to serve as a simple torque wrench. The curve in the blue plastic handle straightens when you've applied enough torque to each bolt.

Channel-Mounted and Clamp-On Accessories

The crossbar has a built-in C-channel so you can carry channel-mounted accessories such as bike racks, watersport carriers, and ski racks. The Vortex strips in the top channel come in 3 pieces, so they're easier to adjust than a single long, continuous strip. You can remove, trim, and re-insert the Vortex strips around the mounting hardware of your accessories to keep the crossbar channel capped and quiet. Replacement strips (sold separately) are also available if you remove your accessories or switch to clamp-on accessories.

You can also attach most clamp-on accessories to the bar, and the Vortex strips provide a shock-absorbing, no-slip cushion for any accessories that rest on it.

Built-In Security

Locking covers on each support leg let you secure accessories mounted in the crossbar top channel. These sturdy nylon covers give the rack a finished look and also help secure the rack to your roof. The cover locks are keyed alike, so a single key opens all locks.

RV0416B Rhino Rack Vortex Aero ROC25 Roof Rack for Bare Roofs - Black

Installation Details Alternate Instructions 

This Product Fits The Following Vehicles

• 2010 - 2018 Ram 1500 Quad Cab
• 2019 - 2024 Ram 1500 Classic Quad Cab
• 2009 - 2014 Dodge Ram Pickup 1500 - Quad Cab