Replacement Drive Arm Assembly for Lippert Edge RV Awnings without LEDs - 58" Long - Black

Video Transcript for Review of Lippert Replacement Black Drive Arm Assembly Without LED - LC48DX

Hi everybody. Andy here with etrailer.com. Let's take a real quick look at this Lippert replacement Black Drive arm assembly. Now this is going to replace the drive arm assembly for your Lippert Edge RV awnings without LEDs, and this includes both the drive head, as you can see here and the arm. And then giving you just a brief closeup here of my table. You are going to get this switch to extend and retract this along with the mounting frame that it's going to mount into, and then the hardware that you're going to need to install this into place.

And while I'm there on the closeup, let me just put that head into view there so you can get a better look at it. And so again, this is going to replace the drive arm assembly for your Lippert Edge RV awnings without the LEDs. And then going back out to the wide view here, we're just gonna wire this into place. And then I wanted to mention the label on here says at the bottom Solera by Lippert 2000 series 12 volt power awning. So this is the direct replacement from Lippert, and you're not gonna have to worry about compatibility issues, fitment issues, or anything like that since this is the direct replacement.

But if you happen to have any other additional questions, don't hesitate to reach back out to us. We do wanna make sure that you're getting exactly what you want and need. Well, I think it's gonna wrap up our quick look today. I do hope that it was helpful for you. Again, my name is Andy.

Thank you for joining me.