1992 Ford F-150 Off Road Lights

Hey Dave, The Curt Custom Tail Light Wiring Kit for Towed Vehicles #C96JR would not be intertwined or interfere with the Blue Ox Patriot #BLU37TR. This wire harness is simply plugging into the motorhome and Gladiator tail lights to copy the light…

You are correct the hook ups are for the lights on the Blazer LED Cube Light Kit #BL28VR. The different ratings are for each of the circuits. The lights that come with the kit will fit onto the smaller connections allowing you to connect more…

The easiest to use and highest quality base plate kit that fits your 2023 Jeep Gladiator is the Blue Ox part #BLU53FR which would work great with a tow bar like the #BX7420. We do have custom fit lighting solutions like the Curt part #C96JR that…

Yes, we have the Curt tow bar wiring kit part #C96JR that is a confirmed fit for your 24 Wrangler. This installs by plugging inline with your taillight connectors which means it does not need any splicing.

Yes, the Blazer LED Cube Light Kit #BL28VR can be used on your 30 amp RV as long as you have a 12 volt wiring system which this light uses. As far as how many of these lights you can hook up each remote is capable of controlling up to 4 of these…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Only a small part of the underneath bumper panel on your 2024 Kia Niro is needed to install either the Curt hitch that fits, which is the following part number: - Curt Trailer Hitch Receiver #C77NR I added a portion of the instructions which shows…

Hey David, we've used the LaSalle Bristol RV Roof Vent install kit part #344270KITW to install several MaxxFan RV roof vents and it's worked well so it would also work well for you. This comes with…

The Curt Custom Tail Light Wiring Kit #C96JR is what you will need to connect your tail lights on your 2023 Jeep Wrangler to operate of the tail lights on your motorhome. This will have a 4-way flat connector which plugs into the motorhome or you…

For a replacement circuit board you can use the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents #MA10A04751KS. We have confirmed with MaxxAir that this is the correct for what you have.

I hope I got the right measurement for you Roberto. I included a image with the measurement points that I took on the CargoBuckle Ladder Rack Straps #CB32MR below. If you are needing a different measurement please let me know.

We do have parts available for the 2024 Toyota Tundra 4WD models so we can definitely set you up. For an air bag kit I recommend the Air Lift #AL84JQ. These are the 5,000 lb capacity air bags. They will help level your ride and improve overall…