New Arrivals

Designed for motorcycle and dirt bike tires that are 2" to 6" wide, this chock clips right into the E-track in your trailer. Position the chock at 45 degrees to the left or right, or at 90 degrees - whatever works best for your setup.

• Wheel Chocks
• E Track
• E Track Wheel Chocks
• Brophy

Rust-resistant, zinc-plated brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Zinc Coated Steel
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Pintle Mounting Plate
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Steel brackets clamp onto the side rails of your non-dually, full-size pickup with no drilling required. Creates a dependable anchor point for securing your lightweight camper to the bed. Simple to install and to remove.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Pintle Mounting Plate
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

Get ultimate adjustability for your pintle hitch with this mount. Attach your pintle hook (sold separately) to the plate and then easily slide the plate up or down the shank, securing it with the included pins and clips, to change the height.

• Pintle Hitch
• Pintle Mounting Plate
• 10000 lbs GTW
• 2 Inch Hitch Mount
• Standard Shank
• Brophy

The angled design of these tie-downs gives you extra clearance for attaching your turnbuckles, making them easy to use. Powder coated steel brackets clamp onto the side rails of your full-size pickup with no drilling required.

• Truck Camper Tie Downs
• Front and Rear Tie-Downs
• Bed-Mounted
• Universal Fit
• Powder Coated Steel
• Brophy

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 43" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Motor Parts
• Actuator
• Lippert

Replace a missing side plug on your Lippert Power Tongue Jack V2. Push-in rubber cover (1-3/8" OD) seals the jack-head opening to keep out water, dirt, and road grimerestoring full protection in seconds, no tools required.

• Lippert

Pull-down spout on this kitchen faucet rinses that tough food residue off your plates and then self-retracts with the included hose weight. You can rotate the spout around 360 degrees and fill a glass or pot from any angle of your island counter.

• RV Faucets
• Kitchen Faucet
• Standard Sink Faucet
• Metal
• 11 Plus Inch Tall
• Single Handle
• Gooseneck Spout
• Black
• Lippert

Install this hub-and-drum assembly on your RV. Compatible with electric or hydraulic brakes. Fits Lippert 8,000-lb axles.Inner bearing (25580) and race, outer bearing (02475) and race, and grease seal included.

• Trailer Hubs and Drums
• Hub with Integrated Drum
• Pre-Greased
• 25580 / 02475
• Standard Grade
• For 8000 lbs Axles
• 8 on 6-1/2 Inch
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera XL 19' power awnings that extend 9'8" from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Extends 117 Inches
• Black
• Lippert

Replace a worn tread on your Lippert Alumi-Tread step with this 25-5/8" grip - textured rubber adds traction for safer entry and exit, while the snug fit keeps it in place so you can focus on the road, not your footing.

• Lippert

Replaces the gear motor assembly with pin and connector for your Lippert Components slide-out system.

• RV Slide Out Parts
• Motor Parts
• Motor
• Lippert Slide-Out Systems
• Lippert

Want a safe way for your kids to get up into their bunk beds? This telescoping RV ladder has grooved steps to help make sure your child has secure footing as they're climbing. Once retracted, the ladder tucks away into one of the bunk beds.

• Telescoping Ladder
• RV Ladders
• Bunk Ladders
• Telescoping
• Hook-On
• Aluminum
• 250 lbs
• 6-3/4 Feet Tall
• Lippert

Replaces or upgrades 1 entry door hinge on your RV. Friction hinge holds the door open in any position instead of allowing the door to swing freely. 5-Leaf design. White color.

• RV Door Parts
• Entry Door
• Hinges
• Controlled Motion Hinge
• White
• Lippert

Restore your Solera Edge slide-out awning with this full idler side replacement kit. Designed for all Solera Edge toppers, it includes black-finished hardware and wire support components for a secure, like-new installation.

• Lippert

Replace a worn tread on your Lippert Alumi-Tread step with this 24-3/8" grip - textured rubber adds traction for safer entry and exit, while the snug fit keeps it in place so you can focus on the road, not your footing.

• Lippert

Replaces or upgrades 1 entry door hinge on your RV. Friction hinge holds the door open in any position instead of allowing the door to swing freely. 5-Leaf design. Black color.

• RV Door Parts
• Entry Door
• Hinges
• Controlled Motion Hinge
• Black
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 15' power awnings with a built-in LED strip that extend 8' from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Extends 96 Inches
• White Fade
• Lippert

Replaces the aluminum hydraulic actuator for your through-frame RV slide-out. Includes a 41" stroke and a 1-1/2" bore.

• RV Slide Out Parts
• Motor Parts
• Actuator
• Lippert

Refresh the drive side of your Solera Edge 58" long RV slide topper with this full hardware kit. Compatible with all Solera Edge models, it includes wire support, switch kit, and rivet in a sleek black finish for lasting performance.

• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Solera 18' power awnings with a built-in LED strip that extend 8' from your RV. Installs more easily than replacing just the fabric.

• RV Awnings
• Roller and Fabric Kits
• Powered - 12V
• Extends 96 Inches
• Black Fade
• Lippert

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/16" chains. 4,400-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy