New Arrivals

If your RV air conditioner isn't cooling or cycling correctly, this standard replacement board for GE RV units brings the system back to normal operation - no smart wiring or generator controls required.

• Accessories and Parts
• RV Air Conditioners
• Control Board
• GE Appliances

Doors banging. Shelves rattling. Fridge on the move. This top-mount bracket puts an end to the chaos and keeps your GE fridge secure through every bump and turn. Installs fast with included hardware for a steadier setup on the road ahead.

• Accessories and Parts
• RV Refrigerators
• Brackets
• GE Appliances

One night it's cool, the next it's muggy. This smart thermostat keeps your RV's temperature consistent, no matter where you camp, so you can sleep better and spend less time fiddling with controls.

• Accessories and Parts
• RV Air Conditioners
• Thermostat
• Black
• GE Appliances

You're swapping out your RV's AC and need the rest of the system to match. This installation kit from GE Appliances gives you the air distribution box, wall thermostat, and control board you'll need to complete a ductless setup.

• Accessories and Parts
• RV Air Conditioners
• Air Distribution Box
• Thermostat
• Control Board
• Black
• GE Appliances

Lost a few bolts during a repair or an install? This four-pack matches the original GE Appliances RV air conditioner hardware, giving you the right size and strength to bolt the unit down properly.

• Accessories and Parts
• RV Air Conditioners
• Mounting Hardware
• Bolts
• GE Appliances

Tired of cleaning up sticky drinks or runaway leftovers after a travel day? This GE travel latch keeps your fridge doors shut tight while you're on the road. It installs fast with included screws and helps prevent messes before they happen.

• Accessories and Parts
• RV Refrigerators
• Door Latches
• GE Appliances

Need to mount your Gorilla-Lift tailgate lift assist a little further back on your trailer's side rails? No worries! Just attach these rollers at the edges of your rails to keep your cables from fraying or snagging.

• Accessories and Parts
• Lift Supports
• Tailgate Assist Parts
• Roller Parts
• Gorilla-Lift

The perfect companion to your Gorilla-Lift tailgate lift assist (sold separately), this handle makes raising and lowering your trailer's tailgate a breeze. With its 360-degree rotation, you can easily find the most comfortable grip.

• Accessories and Parts
• Lift Supports
• Handles
• Gorilla-Lift

• Accessories and Parts
• Brake Actuator
• Hydraulic Drum Brakes
• Disc Brakes
• Adapters
• Deutsche Hydrapro

The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• 32000 lbs
• Bolt-On
• Shock-Absorbing
• 5 Mounting Positions
• Gen-Y Hitch

Upgrade your B&W Patriot hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.

• Accessories and Parts
• 5th Wheel Hitch
• Combo Hitch
• Gen-Y Hitch

This shock-absorbing shank gives you 12 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2300 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 11 Inch Drop
• Gen-Y Hitch

Replaces the locking twist clip on your Gen-Y gooseneck clevis pin. Works with all Gen-Y gooseneck clevis pins. Includes 5 clips.

• Accessories and Parts
• Gooseneck Hitch
• Pins and Clips
• Locking Clips
• Gen-Y Hitch

This shock-absorbing shank gives you 6 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1000 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 6 Inch Drop
• Gen-Y Hitch

Replaces one of the ramps for your Gen-Y Hitch aluminum loading ramp set. Ramp is 7' long and 14" wide. Supports 3,000 lbs. Includes serrated aluminum panels for extra grip.

• Accessories and Parts
• Car Ramps
• ATV Ramps
• Trailer Ramps
• Ramps
• Gen-Y Hitch

Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.

• Accessories and Parts
• Hitch Step
• Trailer Hitch
• Skid Plate
• Gen-Y Hitch

Install a weight distribution system (sold separately) on your Gen-Y Hitch adjustable ball mount with this adapter. Shank slides into the 2-1/2" stacked receivers providing attachment points for a system head. Secures with included pin and clip.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Gen-Y Hitch

This shock-absorbing shank gives you 10 mounting positions for attaching your weight distribution system. Flexing rubber cords limit shock. Tongue weight scale shows if load needs to be adjusted. Works with most standard weight distribution systems.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 1500 lbs TW
• Fits 2-1/2 Inch Hitch
• Square - 9 Inch Drop
• Gen-Y Hitch

Replaces the Y shank on your Gen-Y adjustable stabilizer bar kit. Fits in the back of your 2" stacked receiver and provides attachment points for stabilizer bars.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Stabilizer Bars
• Gen-Y Hitch

Restore smooth, one-handed coupler release on your GEN-Y Executive 5th-wheel pin box. This kit includes the handle, cable, eye bolt, and mounting hardware for a quick, drop-in repairno special tools required.

• Accessories and Parts
• 5th Wheel Gooseneck Adapter
• Handles
• Gen-Y Hitch

Simple, but strong, flat hook for use with 2" utility and tie-down straps. Saddle protects the material and reduces the risk of fraying under load. Rated for a 3,335 lb Load limit.

• Accessories and Parts
• Tie Down Straps
• Hooks
• Flat Hook
• Durabilt

Great for vehicle recovery use in the field, this simple J-style tow hook is easily attached and quickly removed. The 15" long hook has a clevis pin attachment for your Grade 70 (6,600 WLL) or Grade 80 (7,100 WLL) 3/8" chain.

• Accessories and Parts
• Tow Straps and Recovery Straps
• Hooks
• J-Hooks
• Durabilt

Replaces the diffused amber lens on your Stage Series rock light. Can also be used as a replacement for other colors so go wild! Lens snaps in place for easy installation.

• Accessories and Parts
• Off Road Lights
• Vehicle Lights
• Lens
• Diode Dynamics

Install your Stage Series rock light flush against your bumper, fender, travel trailer, or anywhere you'd like to let the light shine. Black powder coated aluminum kit includes a flush mount bezel, frame gasket, and mounting hardware.

• Accessories and Parts
• Vehicle Lights
• Off Road Lights
• Rock Light
• Mounting Hardware
• Diode Dynamics