Lost a fender on the road or cracked it backing into a tight spot? This replacement driver's-side fender assembly gets your Demco KarKaddy SS or KarKaddy 3 tow dolly looking sharp and road-ready again.
Square tube welds onto your trailer. Works with 4" width inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM43KV (sold separately).
Add extra strength where your Demco cable anchor bolts to the firewall. This steel plate reinforces thin firewalls for Air Force One or Stay-IN-Play Duo installs, keeping the anchor secure.
Moving your 5th-wheel hitch to a new truck? This replacement hardware kit lets you reinstall your Demco universal above-bed base rails (DM6701) with all-new bolts, nuts, and washers - giving you a rock-solid fit for safe, confident towing.
Replaces 1 of the hard plastic cap plugs that install in the 2-1/2" square guide tubes on your Demco Autoslide fifth-wheel hitch. 2 Originally included with your hitch.
Replace the lost or damaged cable anchor in your Demco Stay-in-Play DUO or Air Force One system. Includes set screw to secure the cable in place and restore your systems function.
Replaces a worn or missing ramp bushing on your Demco Kar Kaddy SS tow dolly. This bushing ensures proper spacing, allowing the ramp to tilt up for storage and secure in lowered position for loading.
Replaces the pull pin on the breakaway switch that came with your Demco Air Force One (9599007, 9599019, 9599020, or 9599021) or Stay-IN-Play Duo (SM99251 or SM99243) supplemental braking system.
Round tube welds onto your trailer. Works with 4" diameter inner tubes (sold separately). Pairs perfectly with the eZ-Latch gooseneck coupler DM73KV (sold separately).
Replace a worn or damaged clevis on your first-generation Demco Excali-Bar tow bar (9511006) with this exact-fit part. Built to keep your tow bar securely attached to your base plate, it restores the solid link your flat towing setup relies on.
If you're tired of your trailer brakes locking when you back up, this hand activated reverse lockout stops the surge actuator from applying the brakes. It installs directly on any Demco DA75 actuator with no electrical hookup required.
Replaces the extension plates for your Chock-N-Lock wheel stabilizers (71001-BX). Expands your wheel chock to stabilize your trailer when parked. Includes one pair of plates.
Heavy-duty, stainless steel locks provide superior security when locking your B&W hitch step to your B&W Tow and Stow 2" or 2-1/2" ball mount. Third-party-tested pin has a 42,000-lb shear strength.
Upgrade your Curt Q-Series or A-Series hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.
The flexing rubber cords built into this adjustable channel limit the vertical shock when you tow your heavy construction or excavation equipment. Bolts into the adjustable channel on your trailer with the included bolts. Coupler sold separately.
Upgrade your B&W Patriot hitch to a combo hitch so you can tow your gooseneck trailer without having to go through the pain of hauling your heavy 5th-wheel hitch out of the truck bed.
Keep your hitch receiver free from grime and protect the rear of your vehicle while you're at it with this skid plate that mounts in your 2" hitch. Durable, corrosion-resistant aluminum has a clear-coat finish.
Restore smooth, one-handed coupler release on your GEN-Y Executive 5th-wheel pin box. This kit includes the handle, cable, eye bolt, and mounting hardware for a quick, drop-in repairno special tools required.
You leave before sunrise, plug into your vehicles 12 V port, and your power station charges while you drive. The 10 ft reach routes neatly to the back, so you arrive with extra power for lights, tools, and the evenings plans.
New adventures are exciting, but leaving your bike unattended isn't. These wheel locks secure your bikes to the rack, deterring thieves and giving you peace of mind. Your ride will stay safe while you take a break or gear up for the next journey.
If you leave everything on the trail and are completely gassed when you're done cycling, you're not gonna want to lift your bike onto a rack before heading home. The Crosstrack Ramp lets you to roll your ride into place and hit the road.
Replaces the end cap with reflector for Hollywood Racks RV Rider (HR1600 or HR1700) or Sport Rider (HR1400, HR1450, HR1450-E, HR1450-R, or HR1455-E) bike rack. Fits 2" square tubing.