New Arrivals

Solid steel shank allows you to connect with most weight distribution systems. The shank measures 8" long from the center of the hitch pin hole to the center of adjustment holes. Adjustable height to level with trailer. Fits 3" receivers.

• Accessories and Parts
• Weight Distribution Hitch
• Shanks
• 2900 lbs TW
• Fits 3 Inch Hitch
• BulletProof Hitches

Increase your towing comfort. Polyurethane bushings built into this dual ball mount absorb vibration and reduce road shock for a smoother ride. Installs into your existing BulletProof adjustable ball mount with included hitch pins and clips.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Drop Hitch
• Ball Mounts
• BulletProof Hitches

Use this anti-rattle device to keep your BulletProof hitch-mounted accessory from rattling in your receiver. For use with 3" receivers. Slide over accessory's shank, insert shank into hitch receiver, then tighten down bolt.

• Accessories and Parts
• Drop Hitch
• Trailer Hitch Ball Mount
• Anti-Rattle Parts
• Clamps
• BulletProof Hitches

The polyurethane bushings built into this adjustable channel mount absorb vibration, reduce road shock, and decrease trailer bounce for a smoother ride. Bolts into the adjustable channel on your trailer with the included bolts.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• 22000 lbs
• Bolt-On
• Shock-Absorbing
• 3 Mounting Positions
• BulletProof Hitches

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/16" chains. 4,400-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/2" chains. 11,900-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 1/4" chains. 3,300-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 5/8" chains. 18,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Replaces the weld-on adjustable channel bracket for your Brophy lunette ring with 5-position adjustable channel (DBX5). Also works with ball couplers AC2B and AC3B.

• Accessories and Parts
• Lunette Ring
• Adjustable Trailer Coupler
• Channel Bracket
• Weld-On
• 5 Mounting Positions
• Brophy

Replaces the 3/16" x 113" long steel aircraft cable for your Brophy cable camper jack with 57" max lift height (CJ41, CJ31, CXHD, or CJ31H).

• Accessories and Parts
• Camper Jacks
• Cables and Cords
• Brophy

Mount your pintle hitch to a plate with these 4-1/2" x 2" Grade 8 cap screws, nuts, and heavy-duty lock washers. Designed for use with Brophy pintle mounts.

• Accessories and Parts
• Pintle Hitch
• Mounting Hardware
• Brophy

Quickly and easily connect your safety chain to your trailer hitch. Durable, zinc-coated, Grade 80 steel construction. Hammerlock coupling link works with 3/8" chains. 7,000-lb Load limit.

• Accessories and Parts
• Trailer Safety Chains
• Safety Chain Parts
• Quick Links
• Brophy

Replaces the rotary knob for your Curt Spectrum trailer brake controller (C51170). Dash-mounted knob keeps your vehicle interior looking sleek while giving you easy access to the brake controller.

• Accessories and Parts
• Trailer Brake Controller
• Control Knob
• CURT

Replaces the 2" hitch ball for your Curt Switch ball trailer ball set with a 1-1/8" neck.

• Accessories and Parts
• Trailer Hitch Ball Mount
• Balls
• 2 Inch Ball
• CURT

Replace the leveling sensor wiring harness in your Lippert Hall Effect RV levelling system with this replacement right rear sensor harness.

• Accessories and Parts
• Camper Jacks
• Remote Receiver
• Lippert

Replaces the 3/8" x 2-1/8" pin for your Lippert Solera RV awning. Dacromet finish provides corrosion resistance.

• Accessories and Parts
• RV Awnings
• Hardware
• Pins
• Lippert

Replace your RV's old or damaged awning roller and fabric with this heavy-duty assembly. Fits Edge and 2000 series 8' power awnings with a built-in LED strip. Installs more easily than replacing just the fabric.

• Accessories and Parts
• RV Awnings
• Fabric
• 8 Feet Wide
• Extends 7 Feet
• Black Fade
• Lippert

Replaces the OneControl Advantage controller with Bluetooth for your Lippert Level Up RV leveling system. Fits all Lippert Level Up leveling systems. Includes flat mounting brackets and hardware.

• Accessories and Parts
• Camper Jacks
• Controllers
• Control Module
• Lippert

Restore push-button power to your Solera awning with this replacement arm kit featuring matching 69 inch Regal arms, flat-back mounts, top-routed wiring, and a black 12-volt rocker switch - just swap the arms and keep your current fabric and roller.

• Accessories and Parts
• RV Awnings
• Arms
• 69 Inch Long
• Pitch Arms
• Flat Awnings
• Black
• Lippert

Replaces the auto-leveling control box for your Lippert Power Gear hydraulic RV leveling system.

• Accessories and Parts
• Trailer Jack
• Control Panel
• Lippert

A damaged harness can make your RV's leveling system unreliable. This 25' replacement restores electrical connections, helping your jacks work smoothly. Designed for Lippert Level-Up systems, it's a simple fix to get you back to camping.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Wiring Harness
• Lippert

Advantage 4-point Ground Control LCD electronics kit.

• Accessories and Parts
• Camper Jacks
• Trailer Jack
• Controllers
• Control Panel
• Lippert

Replaces the electric steps, motor, and control unit for your Kwikee 47 Series RV step. Motor and control unit automatically extend and retract the steps when you open and close the door. Wiring pigtail hardwires to your RV's power.

• Accessories and Parts
• RV Steps
• Motors
• Control Module
• Steps
• Lippert

This kit includes the hardware for your Solera 2000 Series or Edge awning. The needed awning roller tubes and fabrics are sold separately. The 58" long arms offer sliding adjustable pitch. The wire is located at the bottom.

• Accessories and Parts
• RV Awnings
• Arms
• Pitch Arms
• Lippert