Thinsulate thermal blanket wraps around your battery to keep it at an optimal temperature, warming the core 60 to 70 degrees above ambient for quick starts. Includes a grounded cord for easy use.
This electric battery heater warms your battery for reliable cold-weather starts, helping maintain cranking power and improving recharge time. Slim, acid-resistant silicone design installs easily, even in sub-zero temperatures.
The Zerostart 600 watt engine heater is a universal block heater designed to warm engine coolant, improving cold start performance in low temperatures. It provides reliable heating power to aid engine start-up in winter conditions.
This engine heater is a 1500 watt, 120 volt, immersion heater designed for Mercedes engines. It helps warm engine coolant for easier starts and reduced wear in cold temperatures.
Engine block heater helps pre-warm coolant for easier cold starts. Heater also features a 1-5/8inch bore design compatible with a wide range of engines.
Engine block heater helps pre-warm coolant for easier cold starts. Fits Chevy and GMC trucks with 6.6L Duramax diesel. 1000 watt, 120 volt unit includes brass adapter for installation.
This circulation heater is perfect for light-duty use, with a convenient cylindrical design and universal strap for easy installation. It also features a safety thermostat to prevent overheating and a detachable power cord.
This electric heat strip works with your R32 compatible AC unit (sold separately) to remove the chill from your RV or camper on cold or frosty mornings. Power cord and mounting hardware are included for easy, plug-and-play installation.
Coming soon - available February 2025. You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ductless system with the new R32 refrigerant. The new ACs will not work with any systems from 2024 and earlier.
You'll need this air distribution box if you're upgrading your RV's AC to a 2025 ducted or ductless system with the new R32 refrigerant. New ACs will not work with any systems from 2024 or earlier.
Replace your lost or damaged Andersen 2-5/16" weight distribution hitch ball. Designed for use with Andersen weight distribution hitches, this replacement restores safe towing performance.
If your factory gooseneck hitch has a pop-in ball, this adapter is the missing piece to mount your Andersen Ultimate Connection Hitch and tow your 5th wheel. No adapter means no towing, so slap this bad boy in and hit the road with confidence.
Get the height your setup needs with this 14" square coupler tube for your Andersen Ultimate Connection. Extra height helps level your setup, improve clearance, and deliver the smooth towing experience you're after. Mounting bolts included.
Replaces the 2-5/16" and 2" combo hitch ball for your Andersen EZ heavy-duty adjustable ball mount or weight distribution system. Includes combo ball and 2 pins and clips.
This tire change kit makes swapping out a flat on your multi-axle trailer a total breeze. Just drive the good tire up onto the leveler to raise the adjacent tire up to 4" off the ground. You will be back on the road in no time.
Need more slack in your Andersen weight-distribution tension chains? Add up to 11-1/4" instantly with these extensions6 links plus a threaded coupler per side. Remove any links you dont need for a custom fit and smoother hitch setup.
You're lining up the fifth wheel, solo in the driveway, no spotter this time. With one try, it clicks into place. You step out, check the connection, and smile. That funnel did exactly what it promised.
Installed an ARB Summit bumper on your Tacoma and lost your front camera view? This relocation kit moves the camera to a better spot in the grille - restoring visibility and making your Multi Terrain Monitor useful again.
Sway bars help on the road, but off-road, they limit your flex. This full disconnect kit replaces your factory sway bar links and adds quick-release pins, so you can unhook your sway bars and let your suspension work the way it should.
Worn bushings cause clunking, poor handling, and alignment issues. If your suspension feels loose or noisy, replacing your bushings may bring back control, comfort, and confidence - without replacing major components.
Your rear shocks take a beating from rocks and debris - especially off-road. This stone guard protects one Nitrocharger Plus rear shock from impact damage. If you're running two rear shocks, make sure to order a pair.
Protect your investment and add options to your Intensity V2 Solis driving lights with clip-on polycarbonate covers. Used with spot or flood models, the amber color adds contrast in fog or wet conditions, while limiting impact damage. 1 Cover.