Part Numbers: SS98GV,31026
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out.
Features:
Specs:
Snowplow Installation
Front or rear mount? Versatility is the SnowSport LT's middle name.
Installation is quick and simple - just slide the included shank assembly into your 2" hitch receiver and secure with pin.
Once the plow frame is connected, attach the blade by lifting one end at a time onto the frame's holders. The lightweight aluminum blade construction makes lifting or adjusting an easy, one-person job. Secure the blade in either the transport or plowing position with the plow's snap pins. The low-profile design won't block your headlights, and the transport position is secure enough for highway travel.
If using with a rear-mount receiver, simply lower the blade to plow position and back up as usual. For a front-mounted plow blade, just drive forward with the blade in the plow position. The unique design takes the hassle out of plowing: This device has no hydraulics or complicated wiring. The push frame on the shank assembly allows the blade to move along the grade of the terrain for easier, more efficient plowing. The heavy-duty rubber cutting edge is effective yet turf friendly, collecting snow and squeegeeing slush without digging into the ground.
When you are ready to reverse your driving direction, the blade lies back, skimming over the surface of the ground until you change direction again to plow.
Handy blade markers extend vertically from the ends of the plow to help you see where you are plowing.
With the SnowSport LT, plowing snow is as easy as backing out of your driveway. Once you are finished plowing, simply lift the blade, refasten it in the transport position and head off for work or errands.
California residents: click here
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
Specs:
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Average Customer Rating: 4.7 out of 5 stars (27 Customer Reviews)
82 x 14 Residential plow with thick rubber cutting edge self-adjusts up and down to smoothly clear a path on any terrain. Aluminum blade stays in straight-ahead position, and makes plowing your driveway as easy as pulling forward or backing out. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.Awsome product!!! I use this front mount hitch a lot, mostly surf fishing at the beach using an attachment to carry a large cooler and fishing rods. I also use a winch that attaches too. Thanks etrailer.com
LOL!!! You want my opinion on this product? Well the first day was a four hour nightmare! The second day took 10 minutes to mount and tighten the bolts.. Here's why.
The manufacturer gives you absolutely no instruction on how to align and raise the 40 plus pound hitch up and into place all the while dealing with a pivoting sway bar mount. Now remember, you have to align three separate hole patterns to get the mounting bolts on.
Trying to do this "free hand" is impossible.
BUT if you align the hitch mount on top of the sway bar mount aligning the holes up and clamping it in place with two small vice grips, then raise the two separate pieces together with a small floor jack centered to the assembly, it raises up directly in line with the frame mount holes. Presto..... your there.
Won’t be installing until next week.ordered Monday received Wednesday!unbelievable service and shipping!!!I will let you know about installing and fit. Thanks
I just installed the front end trailer hitch on my '93 F150 4x4. Perfect! It went in without a hitch (pun intended). The instructions said 30 minutes install time and I think I beat it. Bonus - Made in USA! The acid test for the whole rig was when I slid the boat into my tricky garage without so much as a squeak from my wife. Not so before.
didnt take much to bend thi pushing snow. customer service was even worse. if you use this to push a plow make sure to add at least a 1/4 inch plate to the bracket mount or the cheap pot metal they used to make it will fold like your wallet.
I ordered the front hitch for my 95 F-150 on Monday and received it on Thursday. I spent about 45 minutes installing it. The hitch fits perfect and now I can back my trailers into a tight spot without using the undersized mirrors or straining my back turning around. I wish I would have bought it years ago.
I put this Front Mount Trailer Hitch Receiver on a 93 Ford F150 pick up, mounting an aluminum snow blade to push snow. Chains on the tires and added weight in the box. I was not nice to it and it worked flawlessly.
It was easy to mount and continues to work great.
The Hitch mounted right up and would recommend to anyone seeking a hitch assembly.
I was a little surprised with the snow plow. I thought it was going to be hydraulic/electric. It does okay, going on flat and slight declines. Inclines not so good. I also. Bought a rear trailer hitch. Very pleased with it.
I bought this front-mount hitch to use on a work truck. At first I was a little worried about it bolting though the sway bar mounts and its capacity but once it was on it was completely solid. I have a cargo basket mounted to it and a generator with a few traffic cones strapped to the basket. In total I have about 200lb on this hitch and I don't notice it at all!
Nice fit and design. More than 1/2 hour job for first time to install. Tool 1 hour to complete job.
92 F-150 4x4 with sway bar shield.
Good quality hitch, pre drilled holes fit truck perfect. Good weld quality and hardware. Bolts ARE long enough to pass thru frame, hitch, and sway bar shield which was one of my concerns.
I had seen no review of it going with the sway bar shield so was a little worried but all I had to do was drill the mounting holes on the shield NOT the frame. Went better than I thought though the drill did bind in the holes a few times because it is almost the right size so the drill bit was barely biting but no big deal. Also the hitch clears the shield by about an inch when installed. Install less than an hour.
P. S. Stock sway bar shield bolts have a clip and not a nut and those are kind of a pain. Will add photos for reference.
etrailer Customer service and shipping is great. East coast to west coast in like 4 days.
Happy customer, would recommend.
Everything fit great. Had to elongate holes in sway bar cover, that’s it. Didn’t have to cut out bumper shroud. Looks great to.
Came great! Fast and all wrapped up right. Haven’t installed plow with it yet.
Perfect fit !! took me 10 minutes to install, plan on using this for a receiver mounted winch system !!!
When we finally got around to installing it was easy and it worked great
I resold it to a customer.. the fit had to be modified but it worked great
Absolutely spot on! Really needed it quick and I needed it to fit first time. Super pumped on this company and products. Top notch gear.
This item is very well built. Way beyond my expectations!
All Good
Revived in timely manner, quality mount
Fast service great product.
Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Sid O.
8/11/2018
The hitch ebooks great. I had a hard time finding a stinger long enough to clear the front bumper.