Part Numbers: TLF2022A,TLF3008A
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
Features:
Heavy-duty strength in a lightweight package: the TorkLift Talon tie-downs are the premium choice for heavy truck campers and unforgiving climates. Made of military-grade aluminum alloy, the removable arms are rustproof and robust while also being lightweight and easy to handle. The receiver brackets are constructed of rugged stainless steel, and both components are protected by a high-impact powder coat finish that guards against wear and tear.
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity is going to sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush to the underside of the vehicle. Remove the arms from the brackets when you're not using them and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.
Features:
Heavy-duty strength in a lightweight package: the TorkLift Talon tie-downs are the premium choice for heavy truck campers and unforgiving climates. Made of military-grade aluminum alloy, the removable arms are rustproof and robust while also being lightweight and easy to handle. The receiver brackets are constructed of rugged stainless steel, and both components are protected by a high-impact powder coat finish that guards against wear and tear.
If you're looking for the best tie-downs for your camper, frame-mounted is the way to go. The frame is the most solid part of your entire vehicle, so it just makes sense to attach your camper to something that's not going to warp, bend, or twist. Even more importantly, the camper's center of gravity is going to sit lower and its weight will be spread across the entire bed. This avoids a top-heavy load perched on top of your bed rails that's liable to sway and get pushed around by crosswinds. The camper's not going to shift or slide around while you drive; it's going to stay put, and your truck is going to handle just like it does without a camper.
Quick Tip: If you have a plastic or spray-in bed liner, it's important that you use a rubber mat under the camper to eliminate any sliding or bouncing.
Frame-mounted tie-downs are also a great pick for preserving your truck's good looks. The brackets install on the frame, tucked nearly flush to the underside of the vehicle. Remove the arms from the brackets when you're not using them and the brackets will be barely visible.
Completely custom to your vehicle, the tie-downs attach to exisiting holes in your frame so that there's little to no drilling and no need for any modifications. Because they're custom, you'll want to use our in-house application guide to make sure you get the exact right model. The tie-downs you need might be different depending on what type of hitch or other accessories you have.
Once the tie-downs are installed, use a set of turnbuckles (sold separately) to secure the camper to the tie-downs. The shank on each arm has 2 pin holes so you can choose how far out they extend, that way the turnbuckles can reach the anchors on your camper without making contact with your truck. Tighten the turnbuckles to the correct level of tension (not too tight!).
Make sure the anchor points are offset from the tie-downs instead of lined up with them so that they will hold your camper from multiple angles. This is important for keeping your camper from shifting. Two holes in the attachment plate of the tie-downs let you find the best angle for you camper anchors.
Average Customer Rating: 4.7 out of 5 stars (1605 Customer Reviews)
Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates. Get the safest and most comfortable ride while hauling your camper with tie-downs that mount on the frame of your pickup. With the arms removed, the brackets are barely noticeable. Made of heavy-duty, rustproof aluminum for harsh climates.Ordered both front and back set for my 2023 F250. All good except one of the bolt holes for the front drive side is missing. Called etrailer. Option 1 - return (we'll see). Option 2 call torklift. Called torklift and left a message - we'll see what the response is. Viewing etrailer website, this is the proper fit. Viewing torklift website "There are no fits available". Photo included.
The rear mounts were easy to mount. The only problem the package was missing 4 flat washers. I also just received the Front mounts. They were a little harder to mount by myself. Some advice is to watch the install on [video]. I ended up using a floor Jack to hold the mounts.
Always a great product! Shipping packaging needs to be improved as these were received dinged up and scratched. Installed anyways as I didn't want to go through the hassle of reorder and return.
Will still continue to purchase products through etrailer, but wanted to make note.
excellent customer service. They helped my husband get the right camper tie downs for our truck camper. Thank you. With a little time he got the tie downs on the truck and they even look nice. I like that we can leave the inserts out when not using the camper. The last tie downs we had stuck outside like steps. Every one was always asking what they were.
About a year ago, I purchased the aluminum Talon Torklift Frame-Mounted Front and Rear Camper Tie-Downs. The install was easy taking the better part of a day including a little help from a local automotive mechanic to loosen and retorque the truck’s leaf spring bolts. The Tie-Downs have worked great since installed with no issues. I highly recommend them.
Thanks for asking Kimberly, I don’t care for them and wish I had bought FastGuns instead. While more money they click in adjusted and ready to go. Each use of the Spring Load XL’s is an ordeal and I’m never really sure they are adjusted correctly. Hope this helps, John
If you have a problem, speak with Eric. Perfect customer support.
I just finished installing the front tie-downs and am really happy with the results. Although the instructions directed me to remove one e-cable bracket, I removed both e-cable brackets on the driver's side to get enough slack to slide the bracket behind the e-cable. See the pictures. Instructions were easy to follow. Many thanks to big A for the extra hands, impact tool and torque wrench!
A quality product that has held up well after a year!
Sturdy construction, well engineered and fit my F-250 perfectly. I do not expect to have any problems with this part.
Bought all three together and they have made traveling with my truck pickup camper and motorcycle trailer safe and secure.
Sturdy construction, well engineered, and easy to adjust. Parts fit my F-250 perfectly.
This install could not of been any easier! Both fronts with truck on Jack stands and wheels off took :10 min total…
Very quick delivery and service. I had to change my order and they corrected with right away, and got me what I required.
Instructions were ok, a video of installation would be helpful
The passenger side was a little confusing but the driver side went smooth, also you need a really good impact wrench for the leaf spring bolts.
The rear tie-downs were a snap to install. I'm happy with the results.
Fit was perfect and installation on my 2020 F350 was easy.
Great Product easy install no holes to drill
I just put them back in the mail to you guys. I didn’t need them.
Fast friendly, customer service exceptionally knowledgeable
Nice product, which i had these years ago, fit was great and easy to install
Easy installation and well engineered
Occasionally I do business with a company who makes me feel like they are genuinely interested in my concerns. etrailer is one such business. William B, Hally C and Sheila C are extremely professional and knowledgeable about the products they sell. Their eagerness to help and politeness really comes through during the phone conversations I have had with each of them. It is a great pleasure to do business with quality people like these folks. Thanks again for all your help.
etrailer.com is a great company. They have quality parts,good prices, fast shipping, PDF installation instructions and excellent customer service.
Fit perfectly. Easy install on my 2020 F350.
Ask the Experts about this Camper Tie-Downs
Do you have a question about this Camper Tie-Downs?
TorkLift Accessories
Fit to this rack on your 2017 Ford F-350 Super Duty
Info for these parts were:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ford F-350 Super Duty Accessories
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.