Do The TorkLift Camper Tie-Downs From A 2022 Ford F-350 Fit A 2023 Ford F-350

Question

Question:

Will torklift front and rear camper tie downs from a 2022 f350 fit and 2023 f350?

asked by: Jeff Z

0

Expert Reply:

The 2022 and 2023 models of the Ford F-350 do both use the same TorkLift camper tie-downs. For your 6-3/4' bed you would need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLF2022 and rear # TLF3008. If you wanted the aluminum and stainless steel Talon versions of these you would need part # TLF2022A and # TLF3008A.

expert reply by: Kevin C

0

Answer 1

You're in luck, the frame designed hasn't changed enough between the 2020 F-250 to the 2022 F-350 so the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs #TLF2022A that you already purchased is still a compatible fit.

view full answer...

Answer 2

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 3

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hey Douglas! The correct Gen-Y gooseneck pin box for your 2022 Forest River Cardinal Red is the #GY33GR. This fits the Rhino bolt pattern and is rated for trailers with a GVWR of 7,275-16,360 lbs. You will also need safety chains #GY49GR to complete…

view full answer...

Answer 6

Hey Doug! The Firestone Ride-Rite Air Helper Springs #F35FV are the right kit for your 2026 Ford F-350 FX4 dually. However, you will need to measure to be sure it fits. The distance from the top of your rear axle to the top of the jounce bump stop…

view full answer...

Answer 7

Hey Jack, yes the Torklift camper tie downs part #TL63PR are the correct set for your 2024 Ford F-350 Tremor with a short bed and factory hitch. The turnbuckles part #TLS9526-2 that you referenced as well would be a great set that matches what you…

view full answer...

Answer 8

Hey Sam! For your 2026 F-350 we have the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. The step will not interfere with the tie-downs so that won't be a problem. See the attached photo. You will also need the TorkLift Locking…

view full answer...

Answer 9

Hello Gary, Thanks for writing in! I'm glad you found us. I'm especially glad you asked about TorkLift tie-downs. If you're hauling a truck camper, they're my favorite option because they're built specifically for the truck and…

view full answer...

Answer 10

Hey Greg, yes we have confirmed with Firestone that the part #F95FV that you referenced is a confirmed fit for your 2026 Ford F-350 long bed dually. These also will not require you to remove your overload springs either. Are you wanting a compressor…

view full answer...

Answer 11

Hey Brady, Brophy in the past has told us that the tie downs part #HSWB don't have a weight capacity but you would want to make sure you use them only with campers that were designed to fit the bed length of the truck. The turnbuckles part #TDHP…

view full answer...

Answer 12

Hey Lori, thanks for reaching out! The TorkLift Tie Downs #TL87DR are a custom-fit kit, so there’s no drilling required on the truck itself. Everything bolts up to existing holes in the frame, which helps keep the install pretty straightforward. As…

view full answer...

Do The TorkLift Camper Tie-Downs From A 2022 Ford F-350 Fit A 2023 Ford F-350

Products Featured in This Question

Featured Help Information

Miscellaneous Media

Continue Researching