Detail K2 Elite Snowplow for 2" Hitches - 84" Wide x 22" Tall
Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"

Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. Long-lasting actuator with internal clutch and wireless remote lets you raise or lower the 3-position blade from your cab.

Features:

• Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
• Electric actuator raises and lowers plow smoothly and consistently
  • Wireless remote control lets you operate plow from the warmth of your cab
  • Internal clutch prevents damage caused by overextension of actuator
  • Simple, chain-lifting design has fewer moving parts than other plow-lifting devices for a longer-lasting system
• Adjustable, 3-position blade can be manually angled left, right, and straight ahead
• Strong rubber deflector on top of plow directs snow down and away from your windshield
• Hardened steel edge breaks up packed snow and ice
• Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
• Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
  • Can extend life of the plow if you hit an obstruction
• Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
• Red visibility markers help you see plow edges so you can steer away from obstacles
• Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
  • Wheel height is adjustable to match your vehicle height
• Plow handle with knob lets you easily move plow up and down during mounting
• Safety chain holds plow in raised position during travel
• Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
• ISO certified
• Simple installation
  • Slides into your vehicle's 2" front trailer hitch receiver

Specs:

• Application: 2" x 2" hitch receivers
  • Cannot be used with hitches or receiver adapters that have built-in drops
• Blade dimensions: 84" wide x 22" tall
• 3 Blade angles:
  • Left 45 degrees
  • Straight ahead
  • Right 45 degrees
• Distance from center of hitch pin hole to the front edge of plow: 50"
• Weight: 283 lbs
• 1-Year limited warranty

The Detail K2 Elite snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled wireless actuator. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.

Simple, Hitch-Mounted Installation

This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.

To install the Elite snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.

The Elite snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.

How to Plow

Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.

To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.

When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.

Smooth, Controlled Lifting with Electric Actuator

The electric actuator on this plow allows you to lift and lower the blade using either a toggle switch that installs in your cab or the included wireless remote control.

To raise the plow, use the switch or remote to activate the actuator. As the actuator moves along the internal screw, the arm on top of the actuator will pivot, raising the plow blade by pulling the chain that is attached to it. This simple, chain-lifting design has fewer moving parts than other plow-lifting devices, so the setup is less complicated and there are fewer parts to have to repair or replace.

This actuator lifts and lowers the snowplow blade smoother than an electric winch. In addition, fewer amps are required to run an actuator than to operate an electric winch, which means that the solenoid on the Detail K2 Elite will last twice as long as the solenoid on a plow that uses a winch. There is also a built-in clutch that prevents damage to the actuator if you try to raise the blade too high or drop it too low. The electric actuator is built to withstand extreme temperatures and wet conditions with its completely sealed gearbox and housing.

Detail K2 Features

The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.

Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.

Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.

AVAL8422ELT Detail K2 Elite Hitch Mount Snow Plow - 84" Wide x 22" Tall Blade

Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.

Features:

• Front-mount hitch provides attachment point for hitch-mounted accessories
  • Winch, spare tire carrier, snowplow, cargo carrier and more
  • No more blindly backing trailer in - just hook it up and drive it forward
• Custom fit is designed specifically for your vehicle
• Computer-aided, fully welded steel construction ensures strength and durability
• Tested Tough - safety and reliability criteria exceed industry standards
• Easy, bolt-on installation - no welding required
  • Complete hardware kit and installation instructions included
• Lifetime technical support from the experts at etrailer.com
• Black powder coat finish covers e-coat base for superior rust protection
• Sturdy, square-tube design

Specs:

• Line pull: 9,000 lbs
• Vertical load: 500 lbs
• Receiver opening: 2" x 2"
• Pin hole diameter: 5/8"
• Limited lifetime warranty

Draw-Tite Tested Tough

Draw-Tite's Tested Tough program provides testing standards far superior to those outlined by the Society of Automotive Engineers (SAE), the go-to source for engineering professionals.

Each Draw-Tite trailer hitch receiver undergoes extensive fatigue testing and static testing with the ball mount that is either supplied or recommended for use with that particular hitch, thus ensuring results that are applicable to real life use. Fatigue testing is also conducted on hitches rated for use with weight-distribution systems.

In addition, Draw-Tite performs static testing on a simulated automobile, as opposed to the rigid fixture used for SAE testing, resulting in a more true-to-life scenario.

etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.

65083 Draw-Tite Front Mount Trailer Hitch Receiver - Custom Fit - 2"