1999 Jeep Wrangler Jeep Hardware

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

Hey William! I don't have a way of knowing how much space there is on a 2023 Gladiator without one here to test it. What I can tell you is that the #FR95DJ measures 2-5/8" long x 50" wide x 21-11/16" tall so you can use those…

The drawer dimensions of the MORryde Trail Kitchen for Jeep Wrangler Or Wrangler Unlimited #MR83MR are 15-3//4 inch wide by 25-1/2 inch long by 6.6 inches tall.

Hello Charles, thanks for getting in touch. We do offer base plate from both Blue Ox #BX1126 and our etrailer brand #e98949 that will fit your 2017 Jeep Wrangler Willys. They are similar in a lot of aspects since both are basically different…

Hey Brandy, yes you would be able to open the rear door of your 2020 Chevy Equinox with the Curt hitch cargo carrier part #C18152 installed and it would have clearance.

The top tray on the MORryde Camping Kitchen with Storage Compartment for Jeep Wrangler #MR83MR measures 0.947" so you're looking at just under an inch tall, which I confirmed with my contact at MORryde. Hope this helps you out!

The first step would be to determine the exact bolt pattern of the wheel. If you click the provided link, you'll be taken to an FAQ article that shows exactly how to do this. Once you determine the bolt pattern, you can compare that information…

The CE Smith #CE27310G spare tire carrier you'd mentioned would work well for your trailer frame. The carrier is compatible with trailer frames up to 4 inches tall and from 1 to 3-1/2 inches wide. The carrier is compatible with wheels with 4 on…

The height of just the mounting bracket of the MORryde part #MR73QR is 6.6 inches and the length is 30 inches. It weighs 84 lbs.

Hey Emilie, We can get your 2024 GMC Sierra 3500 set up with an extension, but to do so what you'll have to do is remove the factory hitch and install the TorkLift SuperHitch Magnum Trailer Hitch Receiver #TL74FR. Reason for that is there…

I checked with Progressive Dynamics and the approved breakers for use with the Progressive Dynamics 4000 Series #PD4045KA are: Thomas & Betts – TB & TBBD series Square D – HOM & HOMT series Cutler Hammer/Bryant – BR & BRD series GE –…

You are correct that you'll need to attach the AC Converter Hot (Black Wire) to a 15 amp breaker when installing the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger #PD4045KA. You will not be limited to 15 amps on the DC…