2020 Hyundai Elantra Trailer Hitch

Features:

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

Installation Notes:

Drilling through vehicle frame required for installation

Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia.

Exhaust must be temporarily lowered for installation

Heat shield must be modified or trimmed for hitch installation

Tech Tip:

Fascia center support arm will need to be removed for installation. Lower fascia will need to be trimmed, but is not noticeable. Zip ties will be used to support fascia using the hitch crosstube after installation.

Features:

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

Installation Notes:

No drilling through vehicle frame required for installation

Requires temporary removal of bumper/fascia during installation

Exhaust must be temporarily lowered for installation

Heat shield must be modified or trimmed for hitch installation

Tech Tip:

Lower fascia will need to be trimmed for hitch installation.

Features:

This fully welded, corrosion-resistant vehicle trailer hitch receiver is perfect for your light-duty towing needs. Draw-Tite's Tested Tough guarantee ensures that this hitch exceeds industry standards. Drawbar sold separately.

Installation Notes:

No drilling through vehicle frame required for installation

Tech Tip:

Hitch does not fit vehicles built in Korea; check door manufacture sticker or VIN with the second letter M denotes Korean-built.

Features:

Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.

Installation Notes:

No drilling through vehicle frame required for installation

Underbody panel(s) and/or fascia must be temporarily loosened or removed. Trimming may be needed to reattach panel or fascia.

Exhaust must be temporarily lowered for installation

Tech Tip:

If mud guards are present, they will need to be removed and reinstalled for hitch installation. Hitch does not fit models with dual exhaust.