2023 Jeep Grille Guard

Hey Willyd, it looks like you have a 7-way round connector which is a bit more rare and for that we only have a 7-way to 4-way adapter like the part #47405. Does your trailer with a 5-way actually use the 5th circuit? If so what is it for?

Hey Alan, the Westin HDX grille guard part #W95EC does not require drilling to install, will work with your Warn winch, comes with all mounting hardware needed, but will not work with your front end sensors and the tow hooks will need to be removed.…

Hello Neil, As a matter of fact we do, and it looks like you already found it! The Westin HDX Modular Grille Guard with Punch Plate - Black Powder Coated Steel #W33GC will fit your 2025 Nissan Frontier PRO-4X model. Congrats on the new truck! What is…

The install of the Aries AdvantEdge Bull Bar #AA89FB does require removing the factory tow hooks.

Hey Fletch thanks for stopping by! Yes, the Aries Grille Guard #AA22PQ will fit your 2024 Toyota Tacoma, but it will interfere with the front sensors. Your best bet to retain the function of these sensors would be a relocation kit, but Aries does not…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

With wanting to air up tires on your RV I recommend going with a Firestone Red Label #F95FV along with the Compressor Kit #F49VV for your 2020 Ford F-350. This compressor kit includes their extreme duty compressor which will last longer than most…

The punch plate refers to the mesh looking section at the top of the grille guard. I attached a picture with it pointed out.

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

If your Ford E-350 has a 7-way on it currently that uses a harness that looks like what you see in the picture I attached the part #C57101 is going to work. Nearly all 7-way harnesses use this same style of connector so there is a good chance this…

Using a junction box makes installing new 7-way wiring much easier. Often times, people will run the wires from a 7-way such as yours to a junction box like part #38656. From there, they will run the standard wire colors to the trailer lights, brakes…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…