1993 Grille Guard

Hey Willyd, it looks like you have a 7-way round connector which is a bit more rare and for that we only have a 7-way to 4-way adapter like the part #47405. Does your trailer with a 5-way actually use the 5th circuit? If so what is it for?

With wanting to air up tires on your RV I recommend going with a Firestone Red Label #F95FV along with the Compressor Kit #F49VV for your 2020 Ford F-350. This compressor kit includes their extreme duty compressor which will last longer than most…

This will depend on if you have a Dually #TL94PR or Single #TL67DR rear wheels on your 2021 Chevrolet Silverado 3500 long bed. These are a fit for the factory receiver, if you have or want to switch to a TorkLift Receiver #TL74FR this would use a…

The punch plate refers to the mesh looking section at the top of the grille guard. I attached a picture with it pointed out.

Using a junction box makes installing new 7-way wiring much easier. Often times, people will run the wires from a 7-way such as yours to a junction box like part #38656. From there, they will run the standard wire colors to the trailer lights, brakes…

If your Ford E-350 has a 7-way on it currently that uses a harness that looks like what you see in the picture I attached the part #C57101 is going to work. Nearly all 7-way harnesses use this same style of connector so there is a good chance this…

Hey Michael, thanks for reaching out! The EcoHitch #EH57FR sits a little higher than the Curt #C52NR so it will give you better ground clearance for your 2024 Chevy Silverado 2500. The EcoHitch is a bit more recessed into the front bumper than the…

Hi KJM; assuming you have the factory trailer hitch the correct TorkLift camper tie-downs for your 2024 Sierra 3500 dually is the Custom Fit Tie Down Kit With TL44FR | TL84FR #TL94PR. This will fit with that built-in step you're referring to as…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Yes, there is Joe! We've got two options for a slide topper that fits a 82-1/2" slide out. They are the Solera RV Slide-Out Awning item #LCV000165062 in black or white item #LCV000163287. Please note you'll want to make sure you have…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

Hi Grace, For a 2018 Chevy Silverado 1500 and Westin HDX Grille Guard you would need the Replacement Mounting Brackets and Hardware for Westin HDX Grille Guard #57-387pk.