Thanks for asking Glen, I found the specs you were asking about. Bigfoot Hydraulic Tongue Jack #BF34FR has 16.5 inches of lift, and when it’s fully extended it measures at 24 and a half inches overall. Retracted, it sits at 8 inches, so you get a…
Hey Bill. We've got just over a dozen options for 15" steel wheels that'll work with the Kodiak Disc Brake Kit item #K2R35S, you were looking at. I have linked our selection below. The 15" x 6" Rim Dexstar Steel Mini Mod…
Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…
Hey Josh, so we can help but we don't have any custom fit gooseneck hitches that fit your 1976 Ford F-250. Best option would be a universal style option like the Curt plate part #C65500 which would need to get welded to the top of the truck frame…
Hey John, the replacement gear kit you'd need is the part #TJD-12000-RODNUT which I attached two pictures that have instructions and an install diagram.
Good news! I was able to get a exploded diagram as well as a set of instructions on how to replace the rod and gears #TJD-12000-RODNUT in the #12000 Series Ram Jacks made after 2012. I have attached them to this page for your convenience. Basically,…
The Thule Wingbar Evo crossbars like #TH711320 have channels on top of them that standard roof rack accessories that are designed for channel mounts. The track nut part #853-5715 that you referenced would fit in this top channel as well.
I would be happy to help! Since your 2021 Subaru Outback Touring XT has the factory 4-way connector I recommend using the 7-way Connector Kit #ETBC7L which is designed specifically for wireless trailer brake controllers. This 7-way plugs into your…
No, they're not the same. The BP01-301 fits 12-1/4" x 4" Dexter brake assemblies and the BP01-330 DEXTER fits newer Dexter brake assemblies made after 2017 that are 12-1/4" x 5". We are out of the BP01-301 as well and have…
Dexter recommends that you check the wires of the brake assemblies of your trailer to determine which magnet would be what you would need. If the wires are white you would need part #BP01-265 and if they are yellow part #BP01-301. However, aside from…
The correct bearing kit for a Dexter 4,400 lbs axle is item #BK2-100. The Dexter 4,400 lbs axles use the same bearings and seals as a Lippert 3,500 lbs axles. This kit includes inner bearing item #L68149, inner race item #L68111, outer bearing item…
Easy place to shop. Fast delivery and great products. Very happy with my purchase.
Ed
Boynton Beach, FL
Padlocks with 9/32 Inch Diameter Shackles
Great for locking a 5th wheel hitch release handle, these padlocks use a 9/32 inch diameter shackle to take the place of a bail pin and deter tampering at stops. If you need keyed-alike sets, a similar option uses a 5/16 inch diameter.
Yes, you can look for a keyed-alike option, but availability can vary. If the 9/32 inch you want isn't offered keyed alike, consider a similar lock with a slightly larger shackle that is. Confirm the shackle diameter and width still fit your application before switching sizes.
Match the shackle diameter to the hole the bail pin uses and confirm the lock's width won't interfere with the handle. Close the lock through the hole to be sure the shackle seats fully. If space is tight, a similar lock with a slightly different shackle diameter or width may be the better fit.
Use a padlock to replace the bail pin. This keeps others from tampering with the handle on your 5th wheel hitch. Verify the shackle diameter fits the hole and the body can close without interference. It's a simple workaround when a dedicated locking bail pin isn't offered for your hitch.
Yes, a padlock can replace the bail pin to keep others from tampering with the handle on a 5th wheel hitch. Check that the shackle fits the bail pin hole and that the lock body clears the handle and surrounding parts. If an exact replacement locking bail pin isn't available, this setup works well for that purpose.
Filters
