Button up your side-by-side for foul-weather rides with a full cab enclosure that wraps in the seating area. Simple installation and a secure fit make these UTV tops a practical upgrade for staying covered on the job or in the woods.
Installation is generally straightforward and can fit well. If the enclosure relies on hook-and-loop, make sure surfaces are clean and fully pressed to improve adhesion. Where possible, use tie straps or lower fasteners to help the doors zip cleanly. Align panels loosely first, then tighten to reduce wrinkles.
Usually no; Full Cab Enclosures are not rated to be installed while trailering at highway speeds. The wind coming off your tow vehicle can beat up the windshield and tear the buckles and straps. If you must tow, remove or secure soft panels per the instructions and check for any stated trailering limits.
A Full Cab Enclosure can provide solid protection and hold up well over time. We've seen units with no fade or damage after one year of hard use. Look for tight fitment to reduce flapping. Check stitching, window clarity, and UV resistance in the description, and inspect buckles and straps periodically.
Yes, some Full Cab Enclosures fit over a factory roof, while others wrap the roll bars and may require removing a hard top. Check the product notes for roof compatibility. If it wraps the bars, confirm clearance around the roof edges. Verify how the doors interface with your roof line and windshield frame before ordering.
Filters
