An In-Depth Look at the LED Combination Trailer Tail Light Video

It sounds like you're looking for a set of submersible tail lights, and which ones you'll want to use depends on the other type of lights you currently have on your trailer-i.e. LED or incandescent. If you've got incandescent lights…

Yes, the right hand version of the Tall Rectangle Submersible LED Trailer Tail and License Plate Light #STL57RB that you referenced is the part #STL56RB.

Hi Gordon; we don't have a way to know the exact replacement lights for your 2023 Karavan KDH-2000-60-8-HD. Looking at pictures, the Incandescent Tail Light for Trailers over 80" Wide #ST56RS and #ST57RS appear to be a close match as far as…

Pacome, I wasn't able to find any info on those lights since those are DOT codes that just tell you what they're used for. Instead, I recommend completely swapping out the entire assembly with the LED Combination Trailer Tail Light #STL57RB…

The SAE-P2-A98 that you are referring to is actually tied to different tests that have been done on the light and doesn't reflect the part number of the light itself. We have found that a good number of customers have replaced lights with the…

If your trailer is more than 80" wide and 37' long then you need 2 rear side marker lights, 2 rear side reflectors, 2 front side marker lights, 2 front side reflectors, 2 intermediate side marker lights and reflectors, as well as 2 front and…

For your Karavan trailer I recommend LED tail lights #STL57RB and #STL56RB. They are a little shorter at 6-1/16 inches but they do mount on studs spaced 2 inches apart on center. they are 3-5/8 inches tall and 2-1/4 inches deep overall. I have linked…

We carry all sorts of replacement trailer lights including taillights that you can see on the linked page. Since trailer makers do not maintain detailed specs on the lights they install during production you can match up the size, shape and functions…

I have an explanation for you. Light kits like the LED Combination Tail Light Kit for Trailers under 80" Wide - Submersible part #TLL56RK and other submersible trailer light are actually a little confusing. They are not completely sealed, if…

I really like the LED Combination Tail Light Kit for Trailers part #TLL56RK. It offers LED lights which you won't have to be replacing bulbs in and with the submersible design you won't have to worry about water. It has the 4-way connector to…

There is no industry standard wiring code. Pollak uses the following: White - Ground Return Black - Clearance, Side Marker, Identification Yellow - Left Turn and Hazard Signal Red - Stop Lamps and Anti-Lock Devices Green - Right Turn and Hazard…

I attached a picture that shows the pin out diagram for the Pollak 5th Wheel / Gooseneck T-Connector with 7-Pole #PK11893-11932 that you referenced.