Videos
for Rv Water Pump
Help Articles
for Rv Water Pump
Expert Answers
for Rv Water Pump
...is the slightly higher PSI rating. Your Artis shuts off at 45 psi and the Flow Max item # LC689052 shuts off at 50 psi. This won't negatively affect the function or use of your plumbing system. What kind...
view full answer...Hey Jay, the SumoSprings Trailer Helper Springs w/ Line Relocation Bracket #SS26MV that you referenced is going to do a great job providing additional suspension support for your 2013 Heartland Cyclone with triple 6k axles. You would need to order…
view full answer......the pump turns on and off. Your # SE57FR pump typically kicks on around 30 psi and shuts off around 50 psi. To get the best performance, you’ll want to set the accumulator’s air pressure to about 2 psi...
view full answer......The SE24FR pump has a flow rate up to 5.0 GPM with a pressure of 60PS…does that mean the pump will provide an output with maxPSI of 60, or the pump will shut down with pressure above 60PSI? I am...
view full answer...Hey Fran. I couldn't find any information online about the h72812-108 flex tech hose assembly. What size fittings are on each end and how long is it? The JR Products item #37207-31485, that you were looking at is, 72" long, 1/2"…
view full answer...Hi Kim; the Seaflo Diaphragm Pump for Boats and RVs #SE58FR you were looking at will work well as a replacement. This has the same flow at 3 GPM with a slightly higher max pressure of 45 psi. The higher max psi won't be an issue. This also comes…
view full answer...Hi Dorothy, The Seaflo Diaphragm Pump #SE58FR would be a compatible replacement for your Shurflo 4008-101-F65, but it has a lower psi rating so you'd see a bit of a drop in pressure. Instead I recommend going with the Seaflo #SE57FR. This unit…
view full answer...Hey, Jay! For the MORryde I-Beam Mounted Stabilizer part #MR96RV, you are going to attach it to the bottom of the I-beam. I've included a link to our install video and attached an image of how it will look once attached to the beam. What camper…
view full answer...Hey, Jay! The Seaflo diaphragm pump part #SE24FR would be a great replacement for your existing pump. You always want to replace your pump with one that is similar in specs as the existing one. Since the Seaflo is 60 PSI and your existing one is 65,…
view full answer...Hey Carla! For a replacement you can use the HydroMax RV Fresh Water Pump - 12 Volt - 3 Gallons Per Minute - 55 psi #P25201. This is comparable to what you have now and should be an easy swap. We have actually had other customers use it in the past…
view full answer...It's a wire color difference but not a function difference on the pins of the 7-way. The difference comes from the fact that the two different styles are representative of two different areas that uses trailers. Traditional is usually seen on…
view full answer......If you're wanting to replace your ShurFlo 2088-403-444 then the Flow Max RV Fresh Water Pump # LC689052 would be a great replacement. It has a 3.0 GPM and a rating of 50 PSI, which will give you...
view full answer...