RV Light Switch - Black, RV Designer

Hey Hugh, we do have a totally hidden trailer hitch that fits your 2026 Subaru Solterra with the EcoHitch part #EH97CR. The lower hitch opening of this hitch is removable so that when not in use you can remove it and the hitch would be totally…

Hey Mike, thanks for reaching out. No. The RV Designer On/Off Wall Switch with Bezel and Plate #RD43VR is only available with a standard, non-illuminated rocker switch. If you're looking for the same functionality with an illuminated switch, RV…

Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

Hi James! The Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long #UCL90CB will indeed stick underneath your camper. You will want to make sure the surface you are sticking it to is as clean as possible for the best adhesion (I…

Hi Travis! 4-1/4" is going to be a pretty typical pilot hole size for a 15 to 16" wheel with 6 lugs, and we have a bunch of options for that. I have the three that I think look the best below, but I also have a link to all of them as well:…

Hey, Bill! I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part #2637R would be a comparable light. We don't have…

Hey John, this problem is usually due to fabric sliding with the top rail, uneven tension, or a misaligned arm. . To fix it, fully extend the awning, center the fabric on the roller tube, adjust the arms, and re-secure the fabric to the rail using…

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

Yes. You can use the LED RV Utility Light #DG52643 with an LED compatible dimmer switch like the LED Dimmer Rocker Switch #37215205 (white) or #37212275 (black). You will need to make sure that any dimmer switch you decide to use is designed…

Yes, you could use the coiled safety cables #RM-643 in place of safety chains when towing your trailer. Just make sure that the trailer is under the 6,000 pound capacity of the cables.

Hey Daryl, I took a look at that PoleStar jack you mentioned and it looks like it has 2" diameter tubing. A good replacement jack foot for that jack will be the #LC165253. Designed to fit 3,500lb jacks with 2" tubing this will be a solid…

Hey Hugh, we do have a totally hidden trailer hitch that fits your 2026 Subaru Solterra with the EcoHitch part #EH97CR. The lower hitch opening of this hitch is removable so that when not in use you can remove it and the hitch would be totally…

Hey Mike, thanks for reaching out. No. The RV Designer On/Off Wall Switch with Bezel and Plate #RD43VR is only available with a standard, non-illuminated rocker switch. If you're looking for the same functionality with an illuminated switch, RV…

Hey Michael! Since you were looking at the SoftStartRV Soft Start #SSR54FR are you wanting that built in as well? The Active Controls ActiveStart Plug-In Soft Start for RVs #AS94FR is a soft start and surge protector all in one. If you aren't…

More of a strip than a bar but definitely not one of the strand type LED lights like item #DIA86QR! The Premium Slim LED Strip Light item #TN38ZR measures 60" long x 1/2" wide x 1/4" thick. It's ridigid and will hold it's…

Hi James! The Optronics Flexible LED Light Strip - Weatherproof - White - 17' Long #UCL90CB will indeed stick underneath your camper. You will want to make sure the surface you are sticking it to is as clean as possible for the best adhesion (I…

Hi Travis! 4-1/4" is going to be a pretty typical pilot hole size for a 15 to 16" wheel with 6 lugs, and we have a bunch of options for that. I have the three that I think look the best below, but I also have a link to all of them as well:…

Hey, Bill! I did some searching about the light that you currently have. Part number 1A-V-1260AR is a Kaper II light, unfortunately we don't carry that brand of light. The Peterson light part #2637R would be a comparable light. We don't have…

Hey John, this problem is usually due to fabric sliding with the top rail, uneven tension, or a misaligned arm. . To fix it, fully extend the awning, center the fabric on the roller tube, adjust the arms, and re-secure the fabric to the rail using…

Hey Richard. The EcoHitch Hidden Front Hitch item #EH79CR will definitely support a 542 lbs motorcycle. It has a 1,000 lbs total capacity no matter how you use it. Unless you have the lightest motorcycle carrier ever, it's not going to work with…

Yes. You can use the LED RV Utility Light #DG52643 with an LED compatible dimmer switch like the LED Dimmer Rocker Switch #37215205 (white) or #37212275 (black). You will need to make sure that any dimmer switch you decide to use is designed…

Yes, you could use the coiled safety cables #RM-643 in place of safety chains when towing your trailer. Just make sure that the trailer is under the 6,000 pound capacity of the cables.

Hey Daryl, I took a look at that PoleStar jack you mentioned and it looks like it has 2" diameter tubing. A good replacement jack foot for that jack will be the #LC165253. Designed to fit 3,500lb jacks with 2" tubing this will be a solid…