I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future.
Kevin
Manchester, MD
Diamond RV Exterior Lights for Porch Light use
Count on Diamond for porch light solutions that are reliable and long lasting. Choose simple on/off or solar motion styles to get the brightness you want. For an easy upgrade, match dimensions and mounting-hole spacing; some swaps need new holes. Wiring is typically 2-wire blunt-cut, and adding a gasket or sealant may be smart if your setup calls for it.
Protection varies. Some lights lacked a gasket or a lens seal, so adding a bead of sealant can help keep moisture out. Inspect for a base gasket and any lens seal before mounting. If there's no gasket, seal the edges and screw holes during install.
Yes, Diamond offers solar porch lights with motion activation that can be very bright. Ensure the panel gets direct sun—awnings can block charging. Motion can be sensitive and insects may trigger it, which can drain the battery, so use the accessible switch to turn it off when needed. Some mount with 3M VHB tape; clean the surface first for best adhesion.
Diamond porch lights can be much brighter than original incandescent porch lights. Many include an on/off switch you can access outside after mounting. Compare light output to your OEM unit if you want a noticeable upgrade. If you prefer a fixed switch location, confirm switch placement in the photos or description.
It might, but not always. Some matched the old footprint; others were slightly larger and needed new holes. Measure housing size and mounting-hole spacing against your current light. Check wire space behind the fixture and plan sealant if a base gasket isn't included. Verify wire polarity, as conductor colors may be reversed on some lights.
Filters
