# 1
Hollywood Racks SR1 2-Bike Carrier - Spare Tire Mount
It's sturdy even off-road, and it's simple to take on and off. I've had to use my spare tire twice since owning this rack, and although I have to remove my bike and loosen the bike rack bolts a bit, it comes off and goes back on with minimal effort, which is nice when you're on the Alaska Highway and it's snowing. I've carried my full-suspension bike on this rack for 35k miles all over the U.S. and Canada. I like how my bike fits close to the tire, where I lock it. My tailgate opens without the bike touching the side of my Jeep. Great bang for the buck.
This HRSR1 bike carrier will not fit a 2023 Jeep Wrangler JL UNLESS you remove the stock Liddy Light and associated bracket. Upon discovering this, I was able to locate an aftermarket kit which allows for the relocation of the light to just above the rear camera. The kit was easily installed and the bike mount was installed just as easily as the directions explain. The new location of the light is partially obscured with the bikes mounted and, although not ideal, it is adequate and certainly better than total removal. I was unable to find any mention of this situation in the install instructions or reviews prior to purchase of the rack. I just wish I had been aware of this before purchase. I would have rated 5 stars for this product were it not for the slight hiccup. Kudos to etrailer. It is always a pleasure to do business with them. They are very helpful, friendly and knowledgeable.
# 2
Hollywood Racks Sport Rider SE Bike Rack for 2 Electric Bikes - 2" Hitches - Frame Mount
This bike rack works great for our 2 Lectric 2.0 e-bikes. We mount it on our 2019 Honda Ridgeline. It folds up nicely when it’s on the truck and we are using our bikes. The locking mechanisms work well also. I contacted support for a smaller hook arm to clamp B over the bike frame. They knew exactly what I needed and shipped it - no problem.
Used the rack for two E bikes on a 4000 mile two month trip. The tack worked great. It is easy to load and unload bikes with just two straps and tower support. The tower folds down to make loading the bike closest to the car just as easy as the outer bike. I usually just line the bike up with the rack and then hold the rear brake so I can pull back on the handlebars to lift the front wheel off the ground and pivot into the front of the rack then lift the rear onto the rack. That makes it easy for one person to load a 50 pound E-bike. The rack itself is rather heavy to mont onto the car but it needs to be to handle the weight of the bikes. Other than the weight it is easy to install by just inserting into the hitch receiver and it has a tension device so it doesn’t flop around when mounted. Overall a great product I am very happy with. Only issue I have it lighting. With the bikes mounted it is difficult to see the vehicle tail and brake lights. With a cover on the bikes the tail/brake lights are useless. I made a “light bar” that I can mount to the rear of the rack inserted where a red reflector is located. Hollywood now sells a strip light that gets strapped onto the bikes. I’m not sure how that would work with a cover. I think they need to have better options.
# 3
Hollywood Racks Destination Bike Rack for 4 Bikes - 2" Hitches - Frame Mount
Sturdy, affordable and good ground clearance. Easily fits large size mountain bikes. Quick assembly and not that heavy at all. Folds up nicely. Only used it twice so far but very happy with this product.
Great personalized serve Outstanding delivery and free shipping Easy to assemble Well thought out and will be a cinch to use Rock solid on my Jeep Grand Cherokee Outstanding value!!! Thanks 1000k!
# 4
Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On
The Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On, is just what I was looking for to be able to build a bike rack for carrying one of my bikes on my motorcycle. It was easy to mount and it holds my bike in place while riding on bumpy dirt roads, city streets, highways and even when I hit some twisty country roads. It's really easy to load and unload my bike when I get to where I want to ride. I use a velcro strap around the quick-release and the fork arm as an added safety as well as a couple tie-downs from my bike handlebars to my motorcycle passenger pegs to help distribute the weight on my rack. If you want to build your own DIY bike rack I totally recommend the Hollywood Racks Truck Bed Bike Carrier - Fork Mount - Bolt On.
Love this product! I built a great bike carrying system for my F-150 using two of these fork clamps. They are easy to install and extremely well made. No more tangled bikes and lots more room in the bed for other stuff! Best way to go for a nice bike rack system. Thanks, Phil T.
# 5
Hollywood Racks Destination Bike Rack for 2 Bikes - 1-1/4" and 2" Hitches - Frame Mount
The Destination bike rack works perfectly on my 2020 Pacifica and I have clearance going over speed bumps! I recently upgraded my bike to a Trek step through which hung too low on my old Thule rack no matter how the cross bar adapter was adjusted. Problem solved!
I realy like how it holds my bikes securly in place. I also like that (without the bikes) I can open and close the hatch on my 2014 Hyundia Santa Fe. I have a 2" receiver on my car. We went away for a long weekend from CT to VT and had no issues with it holding my bikes. Would definetly recomend.
What our customers are saying:
"I recently purchased a trailer hitch and a bike rack from you. I could not be more satisfied with the products and your service. I have searched for a couple of years for the right product at the right price and your company is the best. I just wanted to tell you that when people ask me about the hitch, I will definitely tell them to contact you. Thank you."