Best Honda Civic Trailer Suspension Parts

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

Just what needed for my trailer. My old leaf springs were so rusted that I was one pot hole away from being broken down on the side of the road. These new ones are perfect.

Bought many parts, wheels & tires for a small horse trailer restoration project. Received everything purchased quick and all parts were perfect. Made the job go as smoothly as a 25 year old trailer restoration can go.

Everything arrived in excellent condition and it is exactly what I ordered. Your web site with its filters makes it very easy to find the right items even for our very old trailer.

New suspension parts made a real difference in trailer handling. Original shackles holes were severely elongated, spring eye mounts were also needing attention. Thank you, etrailer for the needed parts and support.

These parts were a perfect replacement for my old rusted u bolts. I would recommend buying flat and lock washers to place on the u bolts under the nuts due to the holes in the plates being big enough that the nuts get a little torn up when you tighten them, also the nuts it came with aren't lock nuts.

Well, these u-bolts are u-bolts. They're for my dual axle cargo trailer. They're 9/16" diameter. If you're familiar with these measurements and familiar with non commercial trailers, these are heavy duty hardware. And what I received, is what I expect. After carefully looking at what I needed and then looking at etrailer's website, I ordered these parts. They worked perfectly. I tightened them without reservation. They're holding. In my opinion, this took a little long to ship out to me, but otherwise, a good product.

Great Experience! When I noticed that the leaf springs on my 44 year old boat trailer had cracked I thought I would never find replacements. I fully expected to have to have something custom built. I was amazed when I found the fantastic diagrams/descriptions dimensions for replacement springs on etrailer.com The phone support person was wonderfully helpful in confirming if items were in stock and ready to ship. The replacement springs arrived on time and everything bolted up perfectly! Thanks for such a great site!

Received products on a timely manner. Everything was as expected and installation went smoothly.

Arrived well packed and as advertised. I'm going to pull the azle out of the boat trailer and wanted to have this 'on hand' should I break some of my U bolts. I've bought from you before - always been happy, thanks

Exactly what I needed, such an easy upgrade with new heavier springs and the wet bolt upgrade kit. etrailer techs helped answer some questions to be sure I got exactly what I needed.

Replaced 50 year old u Bolts on my horse trailer. Fit like a glove, no issues with install and everything fit as it should.

I received my first order of shackle straps and the envelope was taped up with no straps. I emailed etrailer and within minutes I had new ones on the way. No questions asked. Very impressed with the fast delivery of new ones. That's what I call a great business. Thanks a lot. U guys are really a 5 star outfit.

Before and after installation

These U-Bolts along with the 4 leaf springs have worked out for me great. It has been a year since I put them on the trailer and I have traveled many miles with them at this point with no issues. etrailer has always had the parts I need for my trailer and given me the best customer support.

(CSR) was the one who helped us and if I could have left zero stars I would’ve. We walked through all of the specs of our trailer to put new suspension on our trailer. We were missed informed by (CSR) on what would work on our trailer. Now all the parts have been delivered and we have to return EVERYTHING because none of it will work for the trailer we have. We expressed to (CSR) how important it was to not only get these parts quickly but that we had to get the trailer running as quickly as possible. We are very disappointed in the service we received from him and his lack of knowledge. I think some training is needed on his part so that this doesn’t happen to another customer.

Direct replacement. Goods quality

I Waited Too Long to Replace Trailer Bushings -The past few years I would hear “clunking” sound (different than “squeaking”) from my boat trailer, but I got concerned this year as it seemed louder. -With the boat off the trailer I could see wear around the shackle bolts -I called eTrailer to order the parts and was helped by Kayla to order the bushings/shackles/bolts/nuts for my tandem axle trailer -After trying to press the bushings in I realized I measured poorly and had two different bushings, the equalizer had 1 size and springs had a different size. -Amanda helped me get the second set of bushings (delaying the project for 5 days…but my fault) Right or wrong: -I applied anti-seize compound to the shackle bolt threads -I pre-loaded the “wet” bolts with marine grease to fill them up before inserting them into the suspension, adding grease when everything is installed -I tightened the bolts very securely and they backed off the nut ½ turn to allow for suspension movement Lessons learned: -Look for different size bushings in equalizer/springs and measure correctly ID & OD precisely -It takes some time to do this job (about 4 working hours per side) so try to do it when you are not under pressure -If you want the re-paint some parts, allow for primer and top coat drying time, i.e. overnight which adds time to the project, but it comes out better -Have a big breaker bar & extension/enforcer to help get the nuts on & off. My ½” impact gun could not tighten them all the way -A large “C” clamp will press the bushing in smooth & straight instead of using a hammer & block of wood “caveman style” -Annually inspect your trailer suspension for signs of wear and listen for increased noise Thanks again to Kayla, Amanda and eTrailer for help with this project.

Some of the pieces in this kit are of questionable quality. In particular, the threaded center of the nuts are not round, and will not thread on to the bolt. The kit comes with 14 of these nuts, and 7 of them are unusable. This is unforgivable, considering the issue has been reported at least since 2023, as there is a review and accompanying photo on 05/16/2023. So if you buy this kit assuming the problem has been corrected, you will be mistaken. Other than this issue, the kit seems to be acceptable.

great construction, but the screw to connect to the trailer was not long enough.

Did a spring over a year ago, couldn't be happier with the product.

Leaf springs showed up slightly rusted

These were a direct replacement for my 25 year old dump trailer. I removed the plastic bushings and used brass.

The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP

worked great. perfect replacement for my load trail 7 k tandem axel. I paired this up with a new 2 inch bracket and bushings.

Grease fittings are press fit in not threaded grease fitting pulled out on second time greasing it wish it said this in the description I wouldn’t have bought it… junk

I bought these as spare hardware to keep with my trailer. They appear to be manufactured well and will be a direct replacement if I have a failure while transporting.

Delivery was faster than expected and well package in the follow up was great. Thank you, E trailer same great service as before your eternal customer.

Worked great to mount my new leaf springs and axle.

One of the bushings is not machined of drilled all the way through.

This U bolt worked Great...I actually modified my rural king trailer and used these U bolts to fasten my leaf spring to axle...Whst I did was set the springs on top of the axle. They were under it. It raisec my Utility trailer 6 inches. I don't reccomend you try this without watching lots of youtube videos

Arrived earlier than expected. They sure look better than y old over torqued rusty ones.

these work to replace the plastic bushings in the leaf springs. nothing fancy, they work as they should, easy to install.

Correct part to replace the junk/garbage plastic bushings from factory that wear out in about 4 miles. Use with wet bolts, great upgrade

Nice and heavy duty

I orderd the wrong part. So i ended up getting the spring package..worked great.

As expected!!

Perfect fit and fast delivery

Rebuilding the leaf springs and shackles on my 1975 Hale 2 horse. These were needed parts. Customer service was fantastic finding me the right size bushings for the heavier connections.

Was exactly what I was needing. Didn't like the shipping. 1 week from St Louis MO to Springfield Mo