Best 2019 Toyota Prius Cargo Carriers

I bought 23x27 CARPOD walled cargo carrier w/lid (M2205-2201) on 3/30/22, received 4/8/22, it is now 9/6/22. I bought it with cargo bag (items #CS34FR), which I have used two. I have used the cargo bag twice, not worth it for me, cargo bag takes too much space. Instead I wrap items in a tarp. Pretty sure you can figure it out how to make items “water resistant” with tarp, after all the Cargo Bag is also “water resistant”. I also bought the Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span (Item #63232), work great with carpod, it doesn’t rattle. As for the Carpod itself, I love it. I use it about 4 times a month. The clearance is good, I have only hit ground once and that was because that specific exit driveway had a deep swale to it. As shown in picture, I use Carpod on Lexus 2020 RX350L, the rear hatch door clears fine on opening and closing. The only complain is when I go reverse, the rearview camera is blocked AND I have to disable the vehicles rear collision warning system.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Very Good product that fit our needs well for extra carrying space for 5 day road trip with 5 people in Subaru Outback. Wanted something in addition to our cartop carrier that we could lock up gear in as we left car parked for several hours as we explored the coast and Redwoods. Stored a 52 qt cooler, Coleman collapsible 2-burner propane stove, milk crate, similarly sized-plastic bin of odds and ends, 3 camp chairs, large sun shade, blue tarp. All fit with bag closed and top on (used 3 same keyed locks with long U shackles (think 2 inch). Worked great and could barely see it in rearview mirror (had to really look for it) and could not hear it when travelling ( Did use antirattle plate, and hitch lock) . With gear did not feel it alter driving feel at all. Fit 2 inch hitch well and allowed rear gate to open with a couple millimeters clearance to spare (Fantastic! didn't think we would be able to open gate). Fitted with lights, harness was easy and I opted to attach all with twist ties. Quickly made lic plate holder out of sheet metal and used a battery powered light to illuminate plate to stay legal at night. Added some reflective tape all around. Set up worked great and without any problems. No problem travelling with in either up (folded up, no gear) or down (gear stowed and top locked on) position. While at campsites used as counter top for light items and place to spread out wet towels. No problem with CarPod bag but did not have any real precip to test, kept dusty roads out though. The corner ties on bag are a bit short but no big deal. Thought I might build a frame to add rigidity but wasn’t really necessary for us. Overall good item.

Click to Enlarge

Purchased this 1 year ago. Worked awesome for a 9.000 mile cross country trip with three off road adventures at geology tour road Joshua tree, west side road Death Valley, and kingman wash lake mead. No rattle, always secure, great clearance. Would purchase again.

Click to Enlarge

Click to Enlarge

Click to Enlarge

It works, but I only put two electric bikes on it. The mesh seems to bend pretty easy.

Pretty simple to assemble. Recommend having a good wrench (I did not) and a second person to help, but is doable by a single determined person. Very sturdy and I expect it will serve me well.

Click to Enlarge

This is exactly what we needed to hold our cooler on camping trips. Is easy to install (note: can only use the threaded screw with the UHaul installed hitch we got) and easy to remove. Not too big to store (we get it in our 1-car garage, along with the car) in the winter. Like many folks, we were concerned about getting the rear hatch open on our Prius V and with the cooler mounted as far back as possible, we can! Would definitely buy again!

First look - not yet loaded up. Ordered this because the less expensive Curt (C18110) was out of stock. It seems like a worthwhile upgrade anyway, with rounded corners and better tie-down options. Finish seems high quality. Significant play exists in the hitch receiver (Curt C11276 - gap visible in photo) to the point that I ordered a hitch immobilizer and don't plan to test the carrier with a full load until that's installed.

Click to Enlarge

Click to Enlarge

I am extremely pleased on how easy it was to assemble and the sturdiness. I've purchased other brands in the past that took forever to assemble.Since the upper parts of the basket come already welded together, you don't have to worry about screws coming loose. It is an ingenious design. I'm impressed.

Greetings, I am giving these items 3? Because I was offered alternative products that did not fit together. Originally, I intended to purchase a roof rack cargo basket type and a spare tire holder from Yakima manufacturer that go well together, but one of them wasn’t in stock. So, after 3 weeks waiting time, I was offered alternative items via etrailer website, and I accepted them…after all, they are the experts. I got the recommended items through UPS, then I assembled them by myself. The roof rack cargo basket fit well on my car, but the spare tire holder was not compatible with the roof rack cargo basket. They couldn’t be assembled together. I submitted my claim to return the spare tire holder. Now, I have not achieved my goal to carry my spare tire. Understanding the needs and expectations of your customers is critical to maximize customer satisfaction. I am sure both products are good, but they are not compatible together, even though they were manufactured by the same company. Distributors should know better! I returned one item and I hope to be refunded.

Click to Enlarge

Great product. Easily puts together and I was able to install on our 2016 Toyota Highlander OEM roof rails with no problems. The mounting brackets slide to make for a easy fit. Have taken it on two long road trips with zero issues last summer one to the montains and one to the beach. Was able to fit our jogging stroller on in the basket. Had some heavy rain on one trip and seen no signs of water getting into the rails as that was a concern of mine when researching the different racks. The high sides allowed for easy tie downs for the weather bag we put the stroller in. Seemed to add a little road noise with nothing in it but that is to be expected when hauling things on the roof but the wind deflector seemed to keep the noise down. Easy to put on and off with a single person able to lift it. Great product, great fit for the car. Plan on using it for some more upcoming trips.

Click to Enlarge

Click to Enlarge

First look - not yet loaded up. Ordered this because the less expensive Curt (C18110) was out of stock. It seems like a worthwhile upgrade anyway, with rounded corners and better tie-down options. Finish seems high quality. Significant play exists in the hitch receiver (Curt C11276 - gap visible in photo) to the point that I ordered a hitch immobilizer and don't plan to test the carrier with a full load until that's installed.

Click to Enlarge

Click to Enlarge

I am extremely pleased on how easy it was to assemble and the sturdiness. I've purchased other brands in the past that took forever to assemble.Since the upper parts of the basket come already welded together, you don't have to worry about screws coming loose. It is an ingenious design. I'm impressed.

I wanted a small trailer for my 1 1/4" hitch on my Prius V to fit two Rubbermaid Roughneck Trash Barrels for trips to the town Transfer Station. The 17.5" aprox depth of the basket of this trailer fits the bottom of the barrels just right. I judged that a 60" wide would not fit three barrels anyway and that might be too heavy a load, so the 47" x 17.5" inside dimension of this was best. The attached photos show two barrels in the trailer. Some have complained that the assembly instructions are lacking. Here are some tips: The bottom platform pieces should be placed so that the tubing is flush at the central rails, the flat rails with 4 holes that bolt to the center 1 1/4" square tube are a bit wider than the square tubing that make up the bottom platform and the extra lip should point down so you have a nice flush platform in the bottom of the tray where you will be putting stuff. If you have those pieces upside down, you would have a little ridge sticking up on each side of the central square tube and that would not work well as well as the bottom of the tray, and the "T" connectors would not fit correctly. Group the fasteners and you will have three bunches (manufacturer had the nut/bolt/washers assembled together in my shipment) A) 18 small diameter bolts/nuts/washers - those are for the flat A shaped braces which hold the bottom platform halves to the top railing halves. B) 8 medium diameter bolts/nuts/washers - those are for the fore and aft "T" connectors C) 4 large diameter bolts/nuts/washers - those hold the left half and right half of the platform together. Using the smallest bolts, fasten the "A" braces to the bottom platform halves, then bolt to the top platform halves, leave them loose with about 1/8" of play. Now you have two half assemblies of the bottom tray. Place the middle 1 1/4" square "hitch" piece between the two half assemblies and line them up but do not put the 4 big bolts in yet. Put the two "T" connectors at the back and hitch side. The "T" connector with the reflector goes at the back, and the reflector points toward traffic. The other one goes on the hitch side. Loosely bolt the "T" connectors using the 8 medium bolts and then fasten the two sides together snugly with the 4 big bolts. Then tighten all other fasteners. A ratchet and metric sockets and an adjustable wrench to hold the nut while tightening the bolt head is much handier than two wrenches.

Click to Enlarge

Click to Enlarge

Love this!Perfect addition for our Prius. Easy to attach & detach.

A great box, that happens to fit the roof of my Prius (er, Hotel Prius), perfectly. Install was easy, I didn't need a second set of hands, and after a couple hundred miles of test riding, it's doing great. I'm pleased with the purchase and the delivery was almost a week sooner than estimated. Another bonus.

This was purchased off of the etrailer.com website as a "damaged" item at a significantly reduced price. The description on the website described the damage very well and the cargo box has no functional issues of any kind. Also, the cargo box arrived much earlier than I anticipated. Furthermore, when I noticed that the box arrived with the load securing straps missing I emailed etrailer customer support and they had Thule send me two new ones right away. Couldn't be more pleased with etrailer and this cargo box. It fits my 2014 Honda CRV with factory crossbars with just a little bit of rear hatch interference (restricts opening by maybe an inch or two, but can still fully use the rear hatch). Can't speak to durability quite yet as I've only used the cargo box a few times to transport skis and snowboard and plan to use it year-round for road trips. A really great, simple cargo box!

Everything arrived in perfection condition . Very pleased with the easy installation. The Yakima cargo carrier looks great on our Toyota Prius. We are looking forward to taking a long road trip. Thanks for the great service.

I've taken one 1500 mile trip so far with the Yakima RocketBox Pro 14 mounted on my RAV4. I found the box to be quiet and not to have much impact on gas mileage. I lost maybe 1 mpg with it mounted to my flush mounted Whisperbars. I drove through some very heavy rain and had a minimal amount of water inside under a thin rubber mat I had placed on the bottom of the box; none on my luggage got wet. This box works great to give me more carrying capacity when traveling with my two crated Dobermans.

Click to Enlarge

Customer service goes a long way in my book and how an item is presented on its website I've boughten stuff from etrailer before for my prior truck and always had an amazing experience with Etrailer.this is my first cargo box for my new to me Subaru Impreza sport hatchback and doing research on buying one wasn't easy but etrailer made the process quick and painless with exactly what I needed and dimensions were spot on and instructions were perfect couldn't be any more happier with my purchase.the trunx's brand box perfectly compliments my car and looks awesome on it thanks again etrailer you guys rock

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

The box is great, kept everything dry. No noise or rattle. Dont skimp out on a good set of rack bars. Easy install. Made it 3000 miles up the AlCan highway.

Click to Enlarge

We love our new Thule Force XT Rooftop Cargo Boxes and can’t wait for our next trip. Opens from both sides, well designed! Recommend you attach the straps before putting it on top of vehicle.

Click to Enlarge

We were very happy with our Thule roof rack. The low profile design works well and does not have too much wind noise compared to others I’ve had. It’s held up very well also through the seasons.

Click to Enlarge

Love my new Thule canyon xt roof cargo basket!! Fits on my 2022 Toyota Prius Nightshade, it was easy to assemble!! Shipping was awesome came in quicker then I expected!!

Click to Enlarge

Click to Enlarge

Click to Enlarge

Our SportRack cargo box has worked as hoped / advertised since we bought it over a year ago. What initially attracted me to this particular product was the size and design - it holds A LOT, and the way it opens from the back has helped protect our stuff from getting wet and damaged.

Click to Enlarge

The sportrack vista xl is great! This was our first attempt at a roof mounted cargo box and it has preformed exceprionally well! I purchased this as a gift for my wife, to go on her Subaru Crosstrek. We live in western NC, and have used this to go to the outer banks of NC, eastern Tennessee, and even to bring home supplies from Sam's Club! It's super easy and quick to install, even for one person, and we've been fortunate enough to not have a single leak yet; even though we've been through heavy downpours! And there's plenty of room! If you're in the market for a rooftop cargo box this is the way to go.

Very durable basket, and fairly easy to install. It's definitely transformed the look and practicality of our little SUV.

Click to Enlarge

I am very pleased with the quality for the price.Just the right size for my 2017 Chevy Trax.the "U" bolts that are used to clamp the basket to the roof cross bars were a bit long so I cut them shorter & installed rubber caps on top of each stud. This keeps the studs from damaging items in the bssket.See pictures.

Click to Enlarge

Click to Enlarge

Click to Enlarge

I wanted a small trailer for my 1 1/4" hitch on my Prius V to fit two Rubbermaid Roughneck Trash Barrels for trips to the town Transfer Station. The 17.5" aprox depth of the basket of this trailer fits the bottom of the barrels just right. I judged that a 60" wide would not fit three barrels anyway and that might be too heavy a load, so the 47" x 17.5" inside dimension of this was best. The attached photos show two barrels in the trailer. Some have complained that the assembly instructions are lacking. Here are some tips: The bottom platform pieces should be placed so that the tubing is flush at the central rails, the flat rails with 4 holes that bolt to the center 1 1/4" square tube are a bit wider than the square tubing that make up the bottom platform and the extra lip should point down so you have a nice flush platform in the bottom of the tray where you will be putting stuff. If you have those pieces upside down, you would have a little ridge sticking up on each side of the central square tube and that would not work well as well as the bottom of the tray, and the "T" connectors would not fit correctly. Group the fasteners and you will have three bunches (manufacturer had the nut/bolt/washers assembled together in my shipment) A) 18 small diameter bolts/nuts/washers - those are for the flat A shaped braces which hold the bottom platform halves to the top railing halves. B) 8 medium diameter bolts/nuts/washers - those are for the fore and aft "T" connectors C) 4 large diameter bolts/nuts/washers - those hold the left half and right half of the platform together. Using the smallest bolts, fasten the "A" braces to the bottom platform halves, then bolt to the top platform halves, leave them loose with about 1/8" of play. Now you have two half assemblies of the bottom tray. Place the middle 1 1/4" square "hitch" piece between the two half assemblies and line them up but do not put the 4 big bolts in yet. Put the two "T" connectors at the back and hitch side. The "T" connector with the reflector goes at the back, and the reflector points toward traffic. The other one goes on the hitch side. Loosely bolt the "T" connectors using the 8 medium bolts and then fasten the two sides together snugly with the 4 big bolts. Then tighten all other fasteners. A ratchet and metric sockets and an adjustable wrench to hold the nut while tightening the bolt head is much handier than two wrenches.

Click to Enlarge

Click to Enlarge

Love this!Perfect addition for our Prius. Easy to attach & detach.