Best 2019 Honda Civic Trailer Wirings

Before installing Hopkins Active Taillight Converter kit 46255 I didn't have any trailer stop lights. After installation all trailer lights worked perfect. S.L.

Hitch went on as advertised. Good quality components and excellent fit, tucking away as good as possible. Support was excellent when calling for advice on wiring kits. Once again etrailer for the win!

eTrailer is super easy to work with. On time deliveries and great pricing. Thanks for great service George J. I will be ordering more items soon.

Product received on time. Thanks.

It works, it doesn’t have indicator lights so it doesn’t make my Rivian think I’m towing unless I actually am. The cap is difficult to remove as it’s recessed into the unit, overall it does the job.

This adapter plugs in to the OEM receptacle without any excessive effort and the flat 4 pin connector on my utility trailer also plugs into the adapter without any excessive effort. As a bonus there is a cover for the 4 pin side of the adapter to protect it the elements when not in use.

Just what I needed for my home-built bike carrier. My wife rides an e-tricycle and by the time I loaded the trike and a couple of bikes on this platform, you could not see the car's taillights or blinkers. This harness worked perfectly!

Used this to rewire a 6 x 10 trailer. Inserted the wire through 3 feet of metal conduit to keep it from being damaged near the coupling. So now the only exposed wire is the ¼ inch right at the connector.

Worked out well.

2 things. 1st@: I think there should be an option to pick tinned wire. 2nd: The ring terminal for the ground needs to be bigger.

Also effing mint

Excellent. That the product I was looking for.

Customer service was great, I called for help connecting the 7-way and they walked me through it. Shipping could be better

I've had this in use for over a year and they don't build them like they use to. I use this on a gooseneck trailer and the piece of plastic behind the spade connector for the clearance lights and brakes has melted, allowing the spade connector to lose contact with the plug on the pickup. So the lights would cut off in the middle of the night and would have to wiggle the connection till I could fix it. I have an older Hopkins plug and never had this problem. To fix the problem I ended up putting pieces of thin copper wire behind the spade and have done it twice since the plastic melted a 2nd time and once again the trailer clearance lights would quit working. Attached are before and after pictures.

I installed a trailer brake kit on my Ford Ranger over a year ago, finding the misc parts and install kit with the help of the etrailer Folks. My truck was rear ended recently, smashing the 7 pin connector, that came as one part number for multiple parts, mounted through the bumper. Calling the etrailer folks, they were able to single out the part I needed without buying the entire install kit again. One five minute phone call and I'm on my way again! Very pleased!

I just had to clip a few wires and it plugged into the 4 prong connector on the van and it works as it should

I added it to my trailer, so when in camp I could have the running lights on without the truck.

You guys are great, professional, keep it up

I have now installed the following on my 2017 Wrangler: Brake light relay kit . Hopkins Towed vehicle Tail Light wiring kit. Blue Ox base plate. Blue Ox Patriot Portable RF Braking System. All of this has taken about 3 days of work spread out over a week or so. Overall it went well. Not too many surprises. Crawling around under a car at 71 is a bit of a strain but I'll get over it. I must say that Donna P. has been a wonderful source of great information and has stayed right on top of the process. eTrailer has been a great source for this project. I would recommend you all with no hesitation.

Works for me??. Just needed a longer one for my utility trailer since I switched vehicles. Always easy and fast to work with etrailer. Thanks again

I have used this product for a full year now, and 7,000 miles, mounted on the front of my towed vehicle behind the motor home. It was easy to install (had to build my own mounting bracket) and has functioned reliably. Filled the boot cover with silicone to keep moisture out. Perfect fit for my application.

This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.

It served its purpose to convert 4 connection to 7 connection to make it compatible with Toyota 7 connection set up diagram which is different than many American or other 7 point connection. Thank you E-Trailer . 5 stars and it's working just fine 1 year out from installing.

Used to make a test lead when trouble shooting new GM trailer brake controller and kept as spare.

The plug is different from original cord. Doesn’t look as good but we’ll see how it works. 1st new cord

It's a bundle of wires with a plug. Hard to make this type of part special above other brands. Price is the big factor. Not quite sure why this one is 50% less cost than some others. But works as expected. Solved the dreaded taillights blinking while traveling on the road.

Great product no issues at all. Product as described & fit properly.

Tough environment for these…need to keep a spare handy

It took awhile to receive my order, but I was informed by e-mail and was kept informed when I should expect delivery. Luckily, was in no rush, so I would reply and wait for an update from you. i received the connector in good condition. Thank you!

Easy install thanks

I do not recommend this product. I bought this for my truck. It seems to be the nicest looking plug on the market but after the first rain, the plug was filled with water. I changed the location from the hitch to the bumper and once again the plug was filled with water after it rained. This condition will obviously lead to terminals corroding and/or wires being shorted out. I have bought a different style plug, unfortunately the same brand but hopefully I will have better luck. May be able to drill a small drain hole in the casing to allow water to escape but shouldn't have to do this on a new product.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Used my 4-5 pin adapter to tow my 20 foot Mako to the ramp here in East Boothbay this past weekend. I am always pleased with the wide array of products etrailer stocks that help keep me on the road.

Perfect fit and application

I have used etrailer probably four or five times now and have been very happy. Shipping is fast, prices are reasonable and the products are of good quality. I purchased more of the Quick Fix 4 Pole Trailer Ends - they work really well for the non-automotive industrial control project I am working on.

Fantastic product, simple fix. Customer service is second to none. I will shop here again!

Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver

parts purchased from etrailer.com for my homemade cargo trailer

Should come with the 7-pin mount for the vehicle. Hence the 4-star review. Part is well designed and fairly easy to install.

I ordered this wiring kit for a 2003 Dodge Ram 1500 I recently acquired. The Ram was not tow ready but did have a factory 4-way. I also ordered hitch #13333. The wiring kit is very high quality and was easy to install. The 7-way fit perfectly where the factory 7-way would have gone. I'm using a Tekonsha Prodigy RF wireless brake controller so the blue lead was not needed but I left some extra should that change. Thanks etrailer!