Best 2017 Jeep Wrangler Electric Winchs

Great Winch fast delivery. Best price of all putting on a 2017 Jeep Wrangler.

I have the winch mounted on a detachable hitch that I have on my 18’ trailer. Pin in on when I need it. We buy , sell and show antique tractors. Some of the tractors we buy aren’t running so we just winch them on the trailer. This winch has excellent power and torque and we can skid any tractor on the trailer even if the rear wheels are locked or if it has been sitting in the weeds for years. Great buy for the money. Shipping was very fast.

Click to Enlarge

Very Happy with the unit. Had to drag a dead tractor up the ramps onto my flatbed. The unit did the trick. I really like the wireless feature b/c I can monitor the loading anywhere around the trailer

Works good with fully charged battery, but if the battery is discharged some, the wireless remote control will not work, and you have to plug the wire in!

This bully as-9000tx is a good in-betweener of a step and a running board. I needed a strong low hanging step that I could "pirouette" on. I am 75years and weigh 280 pounds. Bad back etc. I get up with both feet then turn around and scrunch my ample behind up and on seat. The point is it has held real well. Okay..the installation was not an easy one..My 1997 f150 4x4 3door pickup is not an easy fit. the "seam" that most steps rest on is very narrow and drilling the 2 holes for each mount proved un-doable ..too narrow. These got welded on. The 4 holes that supposed to be drilled for the top part of mounts on the rocker panel...would be very hard (too cramped for drilling)..maybe with a right angle drill You might do it. My installer guy welded them too..and also drilled a couple holes and used larger screw/bolts than were provided. So that is my story. For my truck it is an excellent step but needed a pro guy with welder stuff. Cost me $100 bucks install but he is friend of my son. Probably cost more.?? Cost less on e-trailer than other online retailers.

The step mounts to the rocker panel. It requires drilling with an angle drill. Also, self tapping screws are part of the mounting. I don't trust the self tapping screws because the sheet metal in the rocker panel is too thin and is indented with grooves which make it difficult to line up the self tapping screws. I mounted two of the steps and when finished, I had my son and daughter try them out. The steps both shifted when they were stepped on. I had to make modifications to strengthen the mountings. I would have preferred to have steps that mount to the cab mounts (frame). Now because of the drilling, I will have to try to rust proof the rocker panels. Otherwise, the steps look good and now are strong enough to be used safely.

We also bought the Bulldog off-road winch mounting plate for my husband's 2017 Toyota Tacoma. Everything fit perfect and installation was easy.

Arrived, looks great! Installing tomorrow.

Great winch. Well packaged, arrived at my home undamaged. Easy installation. Mounted very low in my ARB bumper. I ran a hard wired switch (not included) from the driver side A-pillar and still have the option of using the remote. Fantastic look and worked well when I needed it on the trail. Highly recommended.

Click to Enlarge

Click to Enlarge

Click to Enlarge

This winch is a beast! I haven’t had a chance to put it through anything rigorous yet, but I installed it and pretensions the rope. Very impressed with the quality of this winch, and Etrailer has the best pricing of anyone around, even Quadratec wouldn’t price match them when I asked! Thank you Etrailer!

Click to Enlarge

Click to Enlarge

Bolted to trailer that sits outside year round and never had an issue. Only down side is that I wish it was remote controlled or had a much longer cord. Would make it easier to load/unload by yourself. Overall I am very pleased with the construction and power.

I picked this winch from etrailer as it provided an incredible value at the time of purchase vs other option here and from other retailers. It ended up being way overkill for what I use it for, but I never have to worry about overloading it either. Went together well and mounted up like it should to the Bulldog receiver mount I got too (hitch plate welded/mounted on car hauler, winch is removable and not subject to road grim ever). Plan on years of service from this combination!

Worked well, only used them once but they worked as expected, plenty of power, as rated.

Installed it on my motorcycle trailer. Install was a piece of cake! Does what it is supposed to do. 2000LBS capacity works like a champ loading and unloading my bikes.

Great piece of equipment. Will have local company install on the flat-bed utility trailer which is used to transport riding mowers and an occasional golf cart to shops. Will need to purchase battery and waterproof enclosure.

Very heavy duty and a great deal from etrailer, thanks

For my purposes this has worked out well. It is relatively portable and I connect with a hitch on either the front or back of my Envoy. Well constructed and competively priced.

First day working with the Bulldog Wench. It worked as advertised thus far without issue.. Unable to put it through proper trials due an inadequate wench plate. May have to fabricate one from 1/2" stock. The snatch blocks are first rate.

GREAT WINCH FOR THE PRICE-

Used this to winch a vehicle onto a car hauler. The winch pulled the vehicle up with zero problems. I like the fact that this winch is portable. Powered winch off of a deep cycle battery. Winch did not drain battery. Powerful, compact winch. Plenty of accessories included.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Great portability, but I’m going to mount it in my enclosed car transporter. It’ll be used for pull the car in with dead batteries or low tires. Nice!

hi product delivered on time as always have not taken it out of the box to install it yet but I’m sure everything will be fine

Great quality, and works wonderfully. If you're debating this purchase.... make the buy.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Fast service, good prices.

quick delivery. looks intact

I chose this winch for an 18 ft Kwik load roll back open car hauler. Size and price met my needs. Installed it in a 30" tool box on the forward deck of the trailer under the tire rack. Perfect size to hold the winch, battery and additional straps. Using a GM F body battery tray/hold down for securing a group 75 battery. To hook to the battery side posts I did swap the connectors to larger copper eye terminals. Will be finishing it by adding a small solar panel to maintain juice. Only used this once so far. Everything worked very smoothly. Real happy with how it came out. Thanks etrailer!

Click to Enlarge

Click to Enlarge

I've had the winch for a year and its been reliable. I use it to load/unload a 2500 lbs race car from a flatbed trailer. I do have it enclosed in a steel box with a battery and solar panel charger on top. The one issue I have with it is that it does not evenly spool-up the cable...it tends to spool it towards the center versus back and forth across the face of the winch. (If there is a simple fix for that, please let me know!) Otherwise good winch for the money!

I purchased this winch after a friend loaned me his. I had to winch my 6k lb boat on the trailer when the eye hook broke. I had to strap the stern of the boat and winch the boat from the water. It saved the day and bought myself one right away for any emergency.

This is an awesome winch. I use it to haul antique railroad motorcars in and out of an enclosed trailer with ease. This winch is great because it is essentially portable. I hook a short chain to the rear clevis hooks to a bracket in my trailer and pull the machine up the ramps. The power is provided by a battery jump pack by clipping the battery leads to the jump pack leads for now and it works great with no permanent wiring. I also have an open trailer and use it with that trailer as well for pulling tractors and cars onto the trailer as well. In a few seconds I can close up the power cables and the remote cable, close the box, disconnect the winch from the trailer and move it to another trailer or put it away. However, it easily can stay home in the trailer since it is so compact and easy to store out of the way. The only complaint is probably the same with most winches, you must guide the cable onto the reel so it does not bind up on one side and pinch the cable. If you remember to guide the cable, it works awesome and is a very good product. You can also freespool the cable out to hook it onto whatever you are pulling which makes the job faster. The speed it operates is safe and seems like just a few seconds and the job is done. Great product and great service with Etrailer.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

I'm very happy with this winch so far, and also with etrailer for their customer service. The winch arrived quickly after I ordered it, but was missing the hook. I went ahead and installed it on my equipment trailer and was able to offload my son's car, but I really needed the hook to be able to handle the heavy chain needed for loading my tractor. Customer service (Rose B.) was very helpful and the missing hook arrived in less than a week. Installation was easy, and I added two heavy angle-brackets so the winch frame is bolted to the trailer frame as well as the decking (photos attached). I used my own longer stainless bolts because of the thicker material.

Click to Enlarge

Click to Enlarge

Really fast delivery--thanks!

excellent product

Eric was very friendly, polite and eager to help me find what I was looking for, it is a Christmas gift for my husband and he made it very easy and smooth! Great customer service he gave me his extension and said if I had any questions to call, this is the way a business should treat customers very impressed!

I use it in my race car trailer it works great. The wireless remote works better than any one I have used.

Just installed yesterday. Nice appearance and very compact. Smaller foot print than the winch plate on my trailer. It was nice to have the mounting hardware and mounting plate included with the winch. Pulled 20’ of cable out and powered it in. Motor is whisper quiet. I like the 20’ remote cable which gets me to the back end of my 20’ trailer deck easily.

Click to Enlarge

My winch is mounted on a pedestal welded to the tongue of an open trailer. I power the winch with a 12v marine battery mounted in a watertight box and a small solar charger. The winch pulls a 3000-pound car onto a trailer with ease.

The wench mounted very easy with my KFI Polaris wench mount no modifications. Have yet to try it out. Only disappointment was the circuit breaker on the positive battery cable is bear, with no cover. If it bounces around and touches the frame it will short out. As you know riding in an ATV/UTV you are on rough terrain most of the time. Looking for a cable cover, if not I will just tape the sh&$ out of it to make it safe. No heat shrink that size that I can find. But looks like a strong, well built wench. Love the cabled remote. Not a fan of wireless or a toggle in the cab. Would have rated it a 5 but no idea how well it works when the chips are down.

Click to Enlarge

Click to Enlarge

I've bought this winch to put on my car hauler, I mounted it in a tongue tool box to keep it out of the weather. It works like a champ and should last a oong while.

Click to Enlarge

Click to Enlarge