# 1
Convert-A-Ball Dual-Cushioned, Adjustable Ball Mount - 7" Rise to 9-1/2" Drop - 5,000 lbs
We bought this to tow our 3,000 lbs. boat with our Subaru Ascent with a 5,000 lbs. towing capacity. With the OEM ball mount, we could really feel every jolt and jiggle from hard stops, going over bumps in the road, and trailering down dirt roads. However, the dual cushion ball has really improved our trailing experience. Once we get up to speed, we hardly notice we are towing our boat. It's also great because some of the lakes we visit are down dirt roads, and the cushion makes this a much more pleasant experience. I would highly recommend this to anyone towing a boat or larger trailer with a SUV as it maintains that comfortable ride and the jostling of the trailer is much less noticeable.
Rusted within 30 days. The manufacturer refused to warranty the product. I have continued to use it, but it has required some serious rust mitigation and is a flawed product.
# 2
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
The 3” drop is perfect for a stock 4x4 Silverado 1500. I can tow my small trailer as well as my full size tandem axle trailer without changing hitches/balls. Just what I wanted.
Love being able to have access to both 2" & 2-5/16" balls without having to haul around 2 hitche's and then the height may not be right. When I'm not using I can leave it or stow it with very little effort.
# 3
Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 20K
I think overall it is a good product but there are some annoyances. To begin with, this hitch is very heavy. The package weight was 75 pounds, but the main body is at least 50. I can manipulate it, but someone weaker may not be able to. Setting the ball is also a bit tricky with the stopper between the ball mount and the riser. I was able to use my body weight to get the stopper compressed and the pin in, but it was difficult. One suggestion might be to hitch the trailer with the pin out then use the tongue weight of the trailer to get the lower pin lined up. This will not be a good solution for being on the lowest position, but it works for all the others. My other annoyance is it really messes up the back up camera and proximity sensor. Yes, I know I can disable the sensor, but the camera can't be moved which makes hitching alone a bit more annoying. I feel like there is a more elegant design so that there is not a bulge at the top of the riser, but I can't say for sure.
It’s a beast! Installed it n pulled my dump trailer no more rattling jerking nosies etc, wish it was 20lbs lighter my only complaint, The locks could be better I won’t be leaving the hitch installed, the locks are light weight n I believe a hammer will break them off, curt needs to use steel or stainless steel for the locks ( body of locks)
# 4
Gen-Y Torsion 2-Ball Mount - 2-1/2" Hitch - 3" Rise/6" Drop - 32K
I just received the hitch and installed it but have not had a chance to pull with it. It appears to be very well made and is a heavy hitch at 118lbs. I have a 45ft coach and pull a 16k stacker trailer so will see how it does. Will update in a couple of weeks.
I pull a 22k stacker trailer with about 3000lb of tongue weight with a class A pusher with a custom receiver hitch that I had built for it. Decided to try the gen y after talking with someone else who swore by it. After driving cross country I can say it improved the ride quality dramatically. Worth every penny
# 5
Gen-Y Torsion 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 5" Drop/Rise - 10,000 lbs
This hitch is amazing!!! Be prepared though it is very heavy! I love how easy it is to adjust to different heights and ball sizes with the 2 common sizes provided. The scale on the back can be helpful to let you know if you have the proper trailer weight. The more you use it the more you will like it!
Love the height adjustment for all 3 of my trailers suuper solid, I get compliments all the time when people see it "wow that things stout!" Keeps the trailer tongue from excessive bobbing, the pins it came with are a huge improvement from the standard Bobby pin style I was used to. Over all I do not regret a dollar spent and would highly recommend to anyone looking for an initial purchase or upgrade their tow life
# 6
Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 6" Drop - 7K
Awesome product!! Performs exactly as advertised. I have 2011 Ford F-150 with Bilstein 5100 shocks towing a 4,000 lbs horse stock trailer. Before with a standard ball mount there was occasional bucking on harsh roads and the ride quality felt a little bouncy. After test driving with this Gen-Y hitch on a variety of road conditions and over railroad tracks, I couldn’t be happier! Night and day difference with ride quality - you can see the trailer in the mirror gently moving up and down with the bumps but barely even feel anything in the truck. Would highly recommend and look forward to hauling my horse with it and expect it will be a smoother ride for my horse as well. When using this hitch, I would recommend adding a Roadmaster Quiet Hitch U-Bolt Clamp as their was a little play with the hitch in the receiver and made for a nice solid setup.
I bought this mount last year to see if it would reduce bouncing and jarring the contents in my vintage Airstream. When loaded, my tongue weight is right at the top of the optimum range for the Glyder at just under 700 lbs with a trailer weight of approximately 5500 lbs. I have pulled the camper about 4000 miles using this mount. Unfortunately it doesn't seem to help smooth the ride in many circumstances. On severe bumps, it might be worse. The primary problem appears to be that the spring in the hitch is insufficient for the load. Just setting the hitch on the ball results in fully bottoming the travel. That means it's basically rigid in one direction since the travel limits are metal to metal. The metal to metal travel limit design seem to increase jarring of the contents rather than reduce it when the hitch moves from limit to limit. The hitch seems to be well made and works better on lighter trailers. I have used it on my 16' utility trailer and it seems ok there. However, even unloaded that trailer will nearly bottom out the travel range with a 450 lb tongue weight.
# 7
Lock N Roll Articulating Hitch for 2" Receivers - 2-1/2" Drop/Rise - Vehicle Side - 11K
Very secure and solid!! It keeps your trailer tight with no shifting like a ball mount. It also allows for hooking up from any direction if you get boxed in by another vehicle. I was boxed in and only could attach from an angle and not straight in. A life saver!!!
This new set up has resolved a long time issue with my overland trailer and tow vehicle.
# 8
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black
I purchased the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 3" Drop, 3-1/2" Rise - 10K - Black and am extremely happy with it. It was $100 cheaper than anywhere else I shopped. Was delivered quickly and was an easy install. I used it to haul a trailer full of wood that I cut up and it got the job done! It is very heavy duty and takes the place of multiple single hitches. It’s nice to have all the options in one.
I like that it stows under the truck and i'm not banging my leg and getting grease on myself. The only draw back was i wanted to use my anti slap bracket and it would not fit due to the insert butts up to the hitch receiver. I'm not experiencing any slapping when taking off or stopping at this time.I use this for my boat and a utility trailer and i don't have to change hitch insert which is really nice, one less thing to do.
# 9
Gen-Y Glyder Shock Absorbing Ball Mount for 2" Hitches - 2" Drop - 7K
Excellent hitch for my sled trailer! When bringing our 5 snowmobiles up north with the open deck trailer, tongue bounce felt like you were riding a bucking bronco the journey. This trailer hitch took 95% of the tongue bounce OUT! The trailer smoothly rides down the road with little to no jerkiness in the cab of the F150. I will definitely recommend this hitch to others!
Very nice product. I pull a lightweight aluminum trailer with a stiff suspension truck. I previously had the tongue break. This definitely eases the shock load on the trailer. It's well built and effective. Etrailer is one of the best e-commerce companies I've ever dealt with. Their customer service is as good as a hometown partner!
# 10
B&W Tow & Stow 2-Ball Mount - Compatible with GM MultiPro Tailgate - 2" Hitch - 10K
Perfect fit, look great! Have no complaints worth every penny. No longer worried I’m going to mess up the tail gate!!
The only thing better would have been if a good locking pin option was suggested at checkout.
# 11
Lock N Roll Articulating Hitch w/ 3-Position Channel - 2" Receivers - Vehicle Side - 11K
Seems like a good item. My problem is that it didn’t come assembled or even with the proper bolts or locking pin like shown in the picture or in the video like they said it did. When I called customer service, the representative kept asking where does it say that it does come with those items instead of helping out and seeing that it should come with it. Next time I will order it directly from the manufacturer. Terrible customer service.
Amazing coupler for our offroad camper. Works perfectly
# 12
Curt Pintle Hook with 2-5/16" Ball - 2" Hitches - 13,000 lbs
Glad I bought this. Got it for a travel trailer that I picked up 500 miles away in western Montana. Wanted to make sure it would be some what level for ride home. Was able to lock down the latch on top which I thought was awesome!! No worrying about trailer coming unlatched.
Good Quality and quick to install.
# 13
Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls - 15K
This thing is amazing! Highly recommended. I can’t imagine towing without it. Especially with the state of the roads in the city
Got my new shock hitch, had my old hide away pulling my landscape and enclosed trailers until I got my new shock hitch when pulling my trailers you don’t even know that they are being polled no shake no rattle no jerking especially when you go across the railroad tracks love my new hitch
# 14
Flash Simple Heavy Duty 2-Ball Mount - 2-1/2" Hitch - 10" Drop, 10" Rise - 18K
Looks fantastic! Easy to adjust. Works like it should. I would recommend this product. Only negative would be that I cannot lower my tailgate with this ball mount as it is tighter to the truck than most. I drive a 2018 Ram 3500
This hitch was much lighter than my last hitch. Height is easily adjusted.
# 15
B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black
Gone are the days I need to carry three different hitches with different sized balls on them. Gone are the days when I, or others, walked around the back of my truck and cracked their shin on a protruding trailer hitch. I keep this folded up in front of the drop where it's not going to catch anyone by surprise. When I'm ready to use it, I simply pull two pins out which allows it to drop free and rotate out. I choose the height I need and install the two pins/clips. To rotate the balls, again simply pull the third pin and rotate to desired size. It was more than I wanted to spend at the time but since I'm glad I spent the money.
Super convenient and well worth the money. All 3 of my trailers have a different ball size, and this is a breeze compared to constantly swapping tow hitches. Keep the pins well lubricated, and they slide well maintain their appearance.
What our customers are saying:
"Excellent-fast service.Thank you!"