# 1
Pollak 6-Pole, Round Pin, Plastic Trailer Wiring Socket w/ Rubber Boot - Vehicle End
I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!
This part is an exact replacement to the part that failed. The failure was caused by a poor installation which allowed the rubber boot to chaff on the truck frame. As it was an exact replacement installation was straight forward although I modified the mounting bracket to prevent a reoccurrence of the problem.
# 2
Adapter 4 Pole to 7 Pole and 4 Pole w/Test Lamps
Not too difficult to install, but I would recommend using a car lift so you don't have to work from your back (review includes wiring harness and Brake Controller)
Very easy install. My truck had a precut hole in the bumper for the plug. I then hooked the spare 4 pole plug into a Reese Universal mounting bracket and mounted it onto the hitch.
# 3
Hopkins 7-Way RV Style Connector with Molded Cable - Trailer End - 8' Long - RV Standard
7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.
Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture
# 4
Hopkins Endurance Multi-Tow 7-, 5- and 4-Way Flat Trailer Connector - Vehicle End - Ergonomic Design
Works great and etrailer folks did an outstanding job with quick turnaround and communication…thank you!
Exactly what we had been looking for. Now I can hook up multiple trailers with different connectors and all the electrics on each trailer works. I mounted mine directly to the receiver hitch frame. The biggest challenge for us was routing the backup wire from the taillight housing, through the body of the truck to the connector. the rest went together fairly easily. Seems to be pretty solid and looks much better than the loose pigtail connector it replaced.
# 5
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Vehicle End
Excellent Quick Delivery When you are driving a Test or NASCAR Hauler you need replacement parts very quick, just like a pit stop. Thank You very much for the rapid delivery. Mint Moore III Ford Performance Race Hauler Driver
A great little heavy duty plug that I use to connect my car to the rv when towing 4 down.
# 6
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Socket - Metal - Vehicle End
I've never really liked Flat-4 type connectors. Unless you leave them dangling, they usually require that you crawl under the vehicle to connect them. (...Murphy's Law dictates that this will always be when it's raining or snowing). This Pollak 4-pole round socket, along with a Tow-Ready harness, and matching trailer connector, provides a neat, factory installed look, that's more convenient, and durable. My orders from etrailer arrived quickly, and with great seller communication. A+
Excelent Quality! Parts was a perfect fit for the factory location.
# 7
Pollak 6-Pole, Round Pin, Trailer Wiring Connector - Trailer End
Quick shipping, will order from them again!
Exactly what I needed and It's a great fit
# 8
7-Way Molded Trailer End with 6' Cable - HD Blue Insulated
Love the flexibility of the cord in cold weather. But where the cord connects to the plug, that has seperated. Still working, but do not know how long it will last.
The bargman 7 way moulded trailer end is a high quality unit. I have been using it for a year now and it has performed flawlessly. The sturdy moulded plug ensures no moisture can get inside. Both the insulation of the individual wires and also the outer sheath are made of silicone and remain flexible even at canadian winter temperatures. There is just one way I think the unit could be improved. The outer blue silicone coating is thin, and not very abrasion resistant. If it contacts the grouns at all, it will quickly wear through. Just a little thicker sheath would be nice. Overall I am very happy with my purchase, and would certainly purchase again
# 9
Adapter 7 Pole to 4 Pole with Flex-Coil Wire and Nite-Glow (TM)
Cathy T was a FANTASTIC help in finding the exact right product that we needed!!! It's sometimes difficult to understand what we need because what we may call an "extension cable," may actually be labeled as a "wiring adapter" or "trailer connector." She was very patient and thorough as she found us the precise product for us. She was also knowledgeable about Jayco trailers, knowing their uniqueness, which also helped her in finding us the right product. And this product is absolutely the exact item we needed!! We luv it cuz it's easily visible for us, as well as law enforcement on the road!! Thank you for your expertise and great selection which provided us with what we need!!
makes for a faster hook-up from Truck to trailer. What is outstanding is the plug lights, when connection is made.
# 10
Adapter 4-Pole to 7-Pole and 4-Pole
Really nice trailer wiring adapter. Very easy install. Takes about 30 minutes with all the tools needed. Drill, 7/64 bit for pilot holes to mount the bracket, flat blade screwdriver and 11/32 nut driver and two #10 self tapping metal screws with locking split washers and a couple zip ties to tidy up the wiring harness.
I looked at so many options before deciding on the B&W hitch, but I have no regrets buying it. There is nothing that my car is suitable for towing that this thing can’t accommodate. I even use it on the front hitch of my mower to move trailers around the yard! Adjusts very easily and stows nicely (though on my Ford Edge it rides lower than I like when stowed).
# 11
Quick Fix (TM) 4 Pole Flat Car and Trailer Ends
They have just what I needed and it arrived very quickly.
I have used etrailer probably four or five times now and have been very happy. Shipping is fast, prices are reasonable and the products are of good quality. I purchased more of the Quick Fix 4 Pole Trailer Ends - they work really well for the non-automotive industrial control project I am working on.
# 12
Hopkins Endurance Flex Trailer Connector Adapter w/ LED Circuit Tester - 6-Pole to 4-Pole
Choosing the correct connector for my pop-up camper and F 150 baffled me before I asked etrailer for help. I got that help, bought the etrailer connector, and it worked like a charm. The lube that came with the connector was an unexpected bonus. Many thanks.
I was very glad to find this adapter so I can hook my bumper pull trailer to the wiring that is already in place for the gooseneck. Easy to order, delivered fast. Problem solved. Thanks
# 13
Pollak 5-Pole, Round Pin Trailer Wiring Connector - Chrome - Trailer End
Used on a pull behind motorcycle trailer so could go from receiving a 6 pin to a 5 pin. Wired it into loom so can use on more than one motorcycle. Works great. Glad to have found a place that even sold this product.
A similar trailer light connector was installed on my motorcycle cargo trailer when I purchased it way back in 2003. When I purchased my new Gold Wing in 2019, I wanted to use the same type of connector. Since I had to add a new female connector to the bike, I decided to renew the male connector on the trailer. I especially like this connector because it always stays secure when connected. I also wanted the connections to be out of sight when not in use. I have pulled my trailer with this new connection for over 2,500 miles and it has performed great.
# 14
Hopkins Vehicle Wiring Converter with 4-Pole End - Includes Tester and Connectors
This is the perfect solution for the Harley Davidson 5 wire harness, easily lets you convert to 4 pin and stores away when you don't need it.
The product did not work and I have to order another that will work.
# 15
Pollak 5-Pole, Round Pin Trailer Wiring Socket, Concealed Terminals - Chrome - Vehicle End
The pins were too big by a little bit. Had to force the female plug into the socket
I purchased both pieces and got the fifth that I was looking for for my motorcycle. I would recommend this for anyone wanting to wire the motorcycle to pull a trailer.
# 16
Adapter 4 Pole to 7 Pole Vehicle End Trailer Connector
This product works as expected. There is not too much to the installation, just plug it in properly and mount the ground wire. I did not find an easy way to mount this to my wife's Odyssey, or to the trailer hitch (item# 75270). Luckily, I do prototype design and manufacturing. So I came up with my own solution. I designed and made my own bracket to mount the 7 pole to the trailer hitch. It works like a charm, and looks great!
i had to replace these two items as my dear daughter went down our goat path driveway too fast. they replaced the originals from etrailer from the prior year. shipping is timely and customer service actually helps! i wired from battery to controller to hitch myself, and everything fit.
# 17
RoadMaster 6-Wire Trailer Connector - Trailer End
etrailer videos make things so easy! Thank you!
Worked fine.
# 18
Pollak 6-Pole, Round Pin, Trailer Wiring Socket - Exposed Terminals w/ Rubber Boot -Vehicle End
Used this as the connection point for the Roadmaster diode wiring kit. Seems to be well made and will hopefully last a long time. I did spray paint it flat black so it blends into the front bumper of my “toad” a little better.
The documentation for wiring is limited and difficult to read without magnification. Otherwise this is well made and works perfectly.
# 19
Pollak Heavy-Duty, 4-Pole, Round Pin Trailer Wiring Connector - Metal - Trailer End
Great place for any trailer needs. They alway gave what I want at a good price and fast shipping.
Just what we needed to make a custom harness for our boat trailers that we often tow with light and medium-duty wreckers. No more zip-typing our wireless drag lights to the trailers! Thanks, guys!
What our customers are saying:
"Very helpful/friendly Customer Service. Competitive Pricing. Shipping was Fast."