# 1
Titan Forged Pintle Hook Mounting Plate for 2-1/2" Trailer Hitches - 18,000 lbs
Just as described. Fits nicely in the receiver.
The ball/pintle mounting plate worked very well. I was surprised that it stuck out past the bumper so far on my 2008 Silverado 2500HD, but it was only about 4-5 inchest past where my ball usually sits with other hitches. I suppose it will work well as strong as it is to take care of anyone who choses to park to close to me in parking lots! :-)
# 2
B&W Pintle Hook Mounting Plate for 2" Hitches - 13" Shank - 14 Hole - 16,000 lbs
Very heavy, solid steel. Really made for if you have a jacked 4x4 truck and need to lower the hitch . Runs low on a standard suspension rear wheel drive truck. Turned it up to not drag the ground.
As described, but no information on the hole diameter on the website, so the Curt pintle mounting bolts don't fit without drilling.
# 3
Buyers Products 3 Position Pintle Hook Mount for 2-1/2" Receiver - 20K
Great service. Awesome delivery times. Great product.
# 4
B&W Pintle Hook Mounting Plate for 2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
The hitch is made from heavy duty steel. And is a excellent match with the owl equipment trailer for hauling out tractor That has weight of 8000 pounds.
This is what I needed to match the height of the trailer. The packaging could have bee better because the hitch broke through the box.
# 5
B&W Pintle Hook Mounting Plate for 2" Hitches - 15" Shank - 14 Hole - 16,000 lbs
Great product and the price can’t be beat. Solid steel shank, 1/2” steel mounting surface, and a 1/2” steel brace that runs the entire length of the mounting plate for extra rigidity. This thing is solid.
I needed a longer neck on my pintle. This item is perfect and heavy duty. Quick standard shipping too.
# 6
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 7-1/4" Shank - 14 Hole - 20,000 lbs
Shipped out fast and exactly what I ordered.
Awesome hitch, would pull the frame out from under the truck before this hitch would fail….
# 7
B&W Pintle Hook Mounting Plate for 2" Hitches - 11" Shank - 8 Hole - 16,000 lbs
Very nice product still working fine
Part is well built and gives me the adjustability I needed for multiple applications for my hitches. The wheel had the correct offset I needed to fit my trailer correctly, and the breakaway kit was a great replacement for the one that was broken on the used trailer I just purchased. The universal trailer brake installation kit was just what I was looking for. Great quality and the ability to run either type of trailer wiring harness in one hookup. Great parts and great service!!!
# 8
Gen-Y Torsion Pintle Hook Mounting Plate for 2-1/2" Hitches - 16 Hole - 21K
# 9
Curt Pintle Hook Mounting Plate for 2" Hitches - 6" Shank - 8 Hole - 17,000 lbs
Use this with a curt 16k combination ball/pintle hitch and am very satisfied so far. No drama purchase via Etrailer, and when the torque spec for the hitch — inexplicably — wasn’t included in the literature a call to their friendly team fixed this issue.
mounting plante has worked perfectly. it is the only one that i could find that was rated for the weight when mounted upright or down when using a 2" reciever. shows no signs of fatigue after a year of towing a 3500lb trailer with a 13,000lb escavator several times a week. very satisfied with purchase
# 10
Curt Pintle Hook Mounting Plate for 2-1/2" Hitches - 10-3/4" Shank - 8 Hole - 20,000 lbs
Solid and heavy built product. Lined up perfectly with the 3” down to 2.5” sleeve I previously ordered for my F250 3” receiver. Awaiting the pintle ball combo I ordered to bolt up to this plate. Thanks for the speedy service.
Fantastic product. Not one complaint.
# 11
Pintle Hook Mounting Plate for 2" Hitches - 11-3/8" Shank - 8 Hole - 12,000 lbs
Great ball mount
It worked out great would definitely buy fro you guys for all my trailer needs.
# 12
Buyers Products 2" Pintle Hook Mount - 1 Position - 9" Shank
works great fast shipping A+++++++++++++++++++
As advertised, good quality of workmanship and finish
# 13
Curt Pintle Hook Mounting Plate for 2" Hitches - 10" Shank - 14 Hole - 10,000 lbs
As I stated with the pintle hitch everything is ruggerder than I had imagined it would be. This set up is going to help me out like no tomorrow. Thanks for your quality of products & speedy delivery!
Exactly what I needed to level pulling my military trailer. The pintle hitch bolted to the mounting plate within a few minutes. Now I can get into the back country with my FJ pulling a trailer made possible by the your pintle hitch/mounting plate Combination. Thanks
# 14
B&W Pintle Hook Mounting Plate for 2-1/2" Hitches - 9" Shank - 8 Hole - 16,000 lbs
The shipping department don't listen I requested the hitch plate to be wrapped in bubble wrap the second time and it looks just like the first one. We are using it on our 1988 1st work truck that we had restored so we want a new hitch for the truck but there package sucks so tge paint gets marked up in shipping and looks bad. I will not be ordering again from etrailer
Works great to replace my 2 inch unit for my Silverado 2500HD
# 15
Trailer Hitch Pintle Hook Mount, 5-1/2" Tall, 6K
I received my trailer hitch pintle hook mount as ordered. Although I have not used it yet, it appears to be very well constructed and finished. etrailer.com shipped it very quickly and maintained e-mail contact with me through delivery. I am extremely impressed with their focus on customer service and I will be ordering from them again.
Good product. Now need one like this that is a reciever for a 2" ball. Needed to replace the pintel hitch that came on the utility body ,bolt on to body as the p hitch was!
# 16
Super Titan Forged Pintle Hook Plate for 3" Trailer Hitches - 25,000 lbs
This review is for all the products I have recently bought from e trailer. First of all, no one will ever steal this hitch from my truck. It weighs way too much. It is rock solid!! A3” square 30k hitch plate, and a 30k pintle hitch! Drop it on your toe and it’s an instant amputation!! I love it!! But of all, customer service is beyond belief. I can only dream of having customer in my business this good! The best!!
etrailer and inventory is outstanding
# 17
Gen-Y Torsion Pintle Hook Mounting Plate for 2" Hitches - 14 Hole - 16,000 lbs
What our customers are saying:
"very easy to shop"