# 1
Curt Ball Mount - 6" Rise, 8" Drop - 11-1/2" Long - 5,000 lbs
I bought both the hitch and ball receiver. The ball receiver was well package and arrived unscathed...unfortunately the hitch arrived damaged or poorly painted. As the attached photo show a bit of sliver metal is visible and I'm concerned that rust will attack and weaken the structure. This uneven and rough area is located on both sides and at both ends. I not sure if it is all damage because of the roughness of the blemish. The area pictured is worst of the four damages. The shipping carton shows damage and repair to the box tear. The tear was repaired with clear tape and staples. The metal staples could have caused some damage exposing the bear metal. I just happen to have some black spray-can paint and will cover the bear metal before installing later the morning. Thank you for this product review opportunity.
The team at etrailer relayed helped find the right solution. Using this ball mount fixed the height issue I had with my SUV not lining up with the trailer. Very grateful for their help.
# 2
Draw-Tite Ball Mount - 3/4" Rise, 2" Drop - 10-1/2" Long - 6,000 lbs
What I ordered quick shipping. Easy install
I had previously purchased the etrailer hitch for my 2021 Ford Transit 150. It was a little short in length and the bumper prevented my current ball mount from working. As always, etrailer had the perfect solution. The Draw-Tite is well made and will now remain permanently with the van to be handy whenever the need arises.
# 3
Gen-Y Adjustable 2-Ball Mount w/ Stacked Receivers - 2" Hitch - 7-1/2" Drop/Rise - 16K
All in all a good set up. A lot more play in the receiver than I expected. Fair amount of rattling around without a trailer attached. In all fairness I do live in a state with poor roads.
Has done what it is supposed to do. I have used the hitch to tow two boats over the last two years using both ball sizes. The only issue is the appearance. Saltwater creates rust and break down of the coating on the hitch. Was never dunked in salt has been effected being near saltwater. Hitch was washed with freshwater after each use in salt. I probably wouldn’t buy again. I have seen some other hitches that can do similar adjustments that do better near saltwater environments.
# 4
Curt Class III Ball Mount with 1-7/8" Ball - 2" Drop - 3,500 lbs
I bought both the hitch and ball receiver. The ball receiver was well package and arrived unscathed...unfortunately the hitch arrived damaged or poorly painted. As the attached photo show a bit of sliver metal is visible and I'm concerned that rust will attack and weaken the structure. This uneven and rough area is located on both sides and at both ends. I not sure if it is all damage because of the roughness of the blemish. The area pictured is worst of the four damages. The shipping carton shows damage and repair to the box tear. The tear was repaired with clear tape and staples. The metal staples could have caused some damage exposing the bear metal. I just happen to have some black spray-can paint and will cover the bear metal before installing later the morning. Thank you for this product review opportunity.
Works perfectly. Fast shipping. Very Satisfied.
# 5
Curt Class III Ball Mount with 2" Ball - 2" Drop - 7,500 lbs
I bought both the hitch and ball receiver. The ball receiver was well package and arrived unscathed...unfortunately the hitch arrived damaged or poorly painted. As the attached photo show a bit of sliver metal is visible and I'm concerned that rust will attack and weaken the structure. This uneven and rough area is located on both sides and at both ends. I not sure if it is all damage because of the roughness of the blemish. The area pictured is worst of the four damages. The shipping carton shows damage and repair to the box tear. The tear was repaired with clear tape and staples. The metal staples could have caused some damage exposing the bear metal. I just happen to have some black spray-can paint and will cover the bear metal before installing later the morning. Thank you for this product review opportunity.
I have two of these. My first I bought two years ago. I very highly recommend this Curt Class III Ballmount 2" Drop because of its price, durability and quality. I towed various class 3 loads with ease and confidence with this ballmount. It slides into the hitch and does its job without fail. It looks excellent after towing a load. etrailer's price is about as good as it gets and delivery is very speedy.
# 6
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Great quality and very reasonably priced.
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
# 7
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
What I ordered quick shipping. Easy install
Sara R was helpful helping me find the right hitch for what I described as needing. I was excited to see the hitch pin in my order details even though I didn't order it. Sadly, the picture gave me a false impression. Overall, excellent customer service and product.
# 8
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
I bought both the hitch and ball receiver. The ball receiver was well package and arrived unscathed...unfortunately the hitch arrived damaged or poorly painted. As the attached photo show a bit of sliver metal is visible and I'm concerned that rust will attack and weaken the structure. This uneven and rough area is located on both sides and at both ends. I not sure if it is all damage because of the roughness of the blemish. The area pictured is worst of the four damages. The shipping carton shows damage and repair to the box tear. The tear was repaired with clear tape and staples. The metal staples could have caused some damage exposing the bear metal. I just happen to have some black spray-can paint and will cover the bear metal before installing later the morning. Thank you for this product review opportunity.
The Extra Long Ball Mount proved useful immediately upon receipt. Delivery was prompt, and the updates from etrailer.com helped plan transport of several bicycles, simultaneously with a camper trailer. The extended length facilitated use with a Swagman bicycle rack, also purchased via etrailer.com. The product arrived in excellent condition, with correct capacity rating, and works perfectly, and in conjunction with the bicycle rack. I recommend purchases from etrailer.
# 9
Draw-Tite Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/2" Long - 7.5K
What I ordered quick shipping. Easy install
Excellent quality, fast shipping. Finding a metric ball for our international application was a bit difficult. We knew etrailer was the place to go for all things "trailer" related. Very happy with the purchase!
# 10
Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Drop - 7,500 lbs
Purchased for a 2006 Jeep liberty. the only issue I have is that it connects right below the spare tire, making trailer attachment more difficult that it should be. If I had gotten a slightly longer hitch, wouldn't have been an issue. It's not a deal breaker, and the hitch itself has works perfectly.
I haul a 5.5x10 open trailer w/ a 900 lb. ZTR, a push mower, and a handful of other tools 3 days a week. It is what it is. It does the job, no problem. A little finish wear and rust on the ball, but nothing major. I LIVE ON A DIRT ROAD, which is probably responsible for the wear.
What our customers are saying:
"You folks are fast. Thank you very much."