# 1
Dexter Trailer Springs Over-Under Conversion Kit
Shipped fast. Fair price.
Received the product on the day specified at 4 p.m. installed in less than 2 hours ....great product
# 2
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 6,000 lbs
Have not installed them yet. They seem to be much better quality than the Equa-flex that came on the 5th wheel. Very happy with E-TRAILER and their knowledgeable staff.
# 3
Equa-Flex Cushioned Equalizers - Double Eye Springs - Tandem Axle - 6K to 8K
Have only put about 3500 miles on these replacement equalizers but they appear to be getting the job done. I'm a little surprised at how much the rubber bushing portion is already compressed but will see long term. The order from etrailer was handled correctly and timely. Happy with the company.
Looked at another brand, decided I liked the Lippert better. Although it was $[XX] more than where I started I was willing to pay the extra due to it having a variable width and it being heavier built than the product I was looking at. Paula was excellent in assisting me with this product, (4) springs, u bolts, wet blots / shackle kit.
# 4
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Tandem Axle - 8,000 lbs
# 5
Curved Equalizer for 1-3/4" Wide Double-Eye Springs - 7-3/4" Long - 9/16" Center Hole
Just what i needed since my original equalizers were completely worn out .
The bolt holes are not bored center of the lobes and are not 90 degrees to the stock. The egg shaped equalizers I am replacing have more material remaining on the thin side than the new ones I just received from etrailer. NOT HAPPY Must Resolve This Issue ASAP
# 6
Dexter Trailer Springs Over-Under Conversion Kit
Our trailer was so low...that it could not make it up a low curb and some driveways - especially when fully loaded. Went with the Dexter axle flip kit. The Dexter bracket and base plate pieces are worth the extra $20-$30 compared to other similar kits - they make fitment easier, eliminate any guesswork on placement, and decrease installation time because of it. Took 2-3 relaxed pace hours for us to do single axle install. Tools required were ratchet/wrench set (13/16 deep socket worked for us for most of the bolts), cheater bar (for working those rusty bolts off), drill, angle grinder (cutter disc for oem u-bolts and leaf spring bolts that are rusted or welded in place, stripper disc for cleaning area around new bracket for welding) welder, floor jack and jack stands. We had to remove the leaf springs, as the wheel mount brackets would not fit through the openings. Was hoping we wouldn’t have to, but it was pretty simple to do. We jacked the trailer up. Removed the wheels. Removed the axle. Cleaned the axle area where new brackets go. Set the height and placement of the new Dexter brackets. We left the OEM brackets on the axle and placed the Dexter ones in the exact same position 180 degrees on the other side. Welded them on. Reinstalled leaf springs. Reinstalled axle, reinstalled wheels. Then voila! We added 6 full inches of height. Super awesome.
One order gets you the kit for only one axle, and realized this after my order arrived for my project on a two axle trailer. Seems obvious now but that wasn’t labeled & pictures were deceiving as I saw two axle trailers advertised. Hardware all seems to be in good shape but packaging quality is poor. Before opening my package I could see into my box with loose hardware rolling around. Thankfully no nuts fell out during shipping. In the future please tape around all seams or place in more secure packaging.
# 7
Road Armor Shock Absorbing Equalizer Kit - Tandem Axle - Qty 2
Install video and instructions say use the same length shackles as the stock ones. That did not work out for me with 2.25” shackles. I Used the 3 1/8” shackles to be able to install with road armor equalizer on a rogue armored toy hauler with tandem axle 7000lb. Stock equalizer was 7.8” from hole to hole. The road armor is 6”. So I tried the 2.25” shackles and was unsuccessful but the 3 1/8” seemed to work well. My wheel base center of tire to center of tire was 37” and after install was 36”.
Last year 3500 miles and now finishing cross country road trip considering road conditions trailer is holding up great thanks for great product
# 8
Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
Got the kit today. Some of the nuts were oval and would not fit on the bolt of course. Now I have to go to box store and find nuts that fit! Not very good quality control!!
After all of the bad weather I was able to finish installing my new suspension system on my 1992 Lance Fifth Wheel. The task was much easier than I had anticipated. The instructional video you provide access to were a big help. Other than having to grind off a nut or two I had no difficulties (See attached photos). The 'list' that had developed on the fifth wheel is now resolved, and towing has already proven to be better.
# 9
Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers - Double Eye Springs
The Morryde tandem kit and the Genuine Dexter single axle kit appear to be quality material, the shackle straps are massive compared to the 1/8” original mild steel straps, and so far have been easy to install. I did this upgrade on a trailer with a GVWR of only 8500# and 3500#, respectively, but if you have a heavier trailer I think you would be a fool to not buy these kits and have the reassurance that your suspension is not the weakest point on your trailer. You only need basic tools to do it, but if you’re short on time, buy the kit and have a shop install it for you. I also bought the Lippert Road armor and have a Shocker equalizer hitch and now you can’t tell there’s a trailer hooked up to me. If your back hurts like mine did after hours of towing because your wife is stuck on her phone or napping, spend the money on these upgrades.
Great upgrade for my Dexter axle. My old hangers were toast and of much lesser quality. I have about 40,000 miles on the old set.
# 10
Front/Center/Rear Hanger for Double-Eye Springs - 4-1/4" Tall - 9/16" Bolt Hole
These were purchased to assist with raising a dual-axle travel trailer. They arrived well packaged, and looked to be well made.They took readily to welding, so there was no issue with inferior material. The attached images show them being welded side-by-side to the frame rail extensions, then the entire assembly attached to the main frame.
Exactly what i needed. Same dimensions as the original. Might have even been a little thicker gage metal than my originals. I added angle gussets to all my hangers to hopefully keep them from breaking again.
# 11
Dexter E-Z Flex Suspension Kit - Double-Eye Springs - Triple Axle - 8,000 lbs
Have not installed them yet. They seem to be much better quality than the Equa-flex that came on the 5th wheel. Very happy with E-TRAILER and their knowledgeable staff.
What our customers are saying:
"Excellent service and communication. Expect part to be excellent too!"