# 1
Curt A20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
This product review is for a Curt A20 fifth wheel hitch for a 2017 Nissan Titan XD with the puck system. The hitch was ordered in late March and received May 10, the status of my order was followed up by Helen M. at etrailer, she was very informative and responsive to my inquiries. The hitch arrived by UPS in two packages. The packaging was in great shape and very substantial. All parts were secure in the package. Be advised this hitch is very heavy so help with installation may be necessary. The hitch base frame is cast iron and very sturdy. The base fit perfectly in the factory puck system. Grease was applied to the pucks and receivers to reduce future corrosion. Unpacking will take about 30 minutes and the installation is very easy and with help will require about one hour. The hitch is installed but at present has not been used and tested under a load, so be advised there will be a follow up to this review in the future. Thanks etrailer for a great shopping experience.
I have towed with the Curt A20 for a few thousand miles. I really like this hitch. The visual hooked versus unkooked indicator is awesome. It operates flawlessly. I do get some chucking over bridge expansion joints. However, it seems like most people have this problem. On normal roads it pulls great.
# 2
Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs
I had reservations about using the Andersen Ultimate fifth wheel hitch, most of the reviews (that I researched) were negative but I decided to try the product for myself. I have a 2016 Titan XD SV (gas) model with a 6.5 truck bed and a 2017 Springdale fifth wheel (253FWRE). I can say without a doubt that the Andersen Ultimate fifth wheel hitch works! I have backed up and jack knifed between 70 and 75 degree angle and had about a foot and a half clearance from my truck cab and fifth wheel. Super easy to install, I did the work myself, the key is to purchase a torque wrench with correct socket and hex key socket. What I believe help make this hitch a success is the offset from hitchball on the Andersen unit (3") and the offset from the gooseneck adapter I believe it is also (3"). Additionally my fifth wheel has a sculpted nose, all of the negative reviews that some say about the Andersen fifth wheel hitch, they fail to mention that they are using an older fifth wheel model that has a flat nose. You may run into issue if you have and older model fifth wheel and a shorter bed than 6.5. Bottom line I have been extremely pleased with my purchase of the Andersen Ultimate fifth wheel hitch and would recommend this product to anyone that wants the easy set up and connection.
We have the Anderson Hitch installed on our 2017 Ford SuperDuty and pull a Reflection 337RLS. We have traveled over 4,000 miles and have been extremely satisfied. The hitch allows plenty of clearance between 5th wheel, bed, and the truck cab. Hook-up and disconnect has always been easy, even with RV lots that were uneven dirt lots. I use Curt thin rubber sound dampeners (item 16900) and this provides a quiet, tight fit between the rails and hitch. Of course the light weight makes it easy to remove when not towing and less weight when you are towing. A great product for the right truck, trailer combination.
# 3
Curt A20 5th Wheel Trailer Hitch for Nissan Titan XD Towing Prep Package - Dual Jaw - 20,000 lbs
This product review is for a Curt A20 fifth wheel hitch for a 2017 Nissan Titan XD with the puck system. The hitch was ordered in late March and received May 10, the status of my order was followed up by Helen M. at etrailer, she was very informative and responsive to my inquiries. The hitch arrived by UPS in two packages. The packaging was in great shape and very substantial. All parts were secure in the package. Be advised this hitch is very heavy so help with installation may be necessary. The hitch base frame is cast iron and very sturdy. The base fit perfectly in the factory puck system. Grease was applied to the pucks and receivers to reduce future corrosion. Unpacking will take about 30 minutes and the installation is very easy and with help will require about one hour. The hitch is installed but at present has not been used and tested under a load, so be advised there will be a follow up to this review in the future. Thanks etrailer for a great shopping experience.
This is one of the best built hitches I’ve owned. Very well built and easily installed
# 4
Curt Q20 5th Wheel Trailer Hitch for Nissan Titan XD Towing Prep Package - Dual Jaw - 20,000 lbs
So far, so good. Easy to install in the Titan XD with gooseneck prep kit. I’ll let everyone know how it hooks up and pulls, but I expect no issues.
Received an E-mail 5 days ago saying it was still on back order and would be notified when they received them and were shipped. Received E-mail yesterday that I had received my order. Found the boxes on front porch. Some rips in the boxes, but no damage to the hitch. UPS may be unhappy since I wasn't home and he had to carry it up a flight of stairs. Hitch is much heavier than my B & W. Took about 5 minutes to assemble and install in Nissan Titan XD with pucks. Too much ice and snow to use yet. Removed it from truck in about a minute. Way faster than my B & W turnover. I'll update review after I tow with the hitch.
# 5
Curt A20 5th Wheel Trailer Hitch w/ R20 Slider - Dual Jaw - 20,000 lbs
This product review is for a Curt A20 fifth wheel hitch for a 2017 Nissan Titan XD with the puck system. The hitch was ordered in late March and received May 10, the status of my order was followed up by Helen M. at etrailer, she was very informative and responsive to my inquiries. The hitch arrived by UPS in two packages. The packaging was in great shape and very substantial. All parts were secure in the package. Be advised this hitch is very heavy so help with installation may be necessary. The hitch base frame is cast iron and very sturdy. The base fit perfectly in the factory puck system. Grease was applied to the pucks and receivers to reduce future corrosion. Unpacking will take about 30 minutes and the installation is very easy and with help will require about one hour. The hitch is installed but at present has not been used and tested under a load, so be advised there will be a follow up to this review in the future. Thanks etrailer for a great shopping experience.
Great Hitch, very happy with this unit. Have pulled the 18K lb fifth wheel over 25K miles (Florida to Idaho, back to Florida and now Alaska). We have covered many rough roads and challenging situations, without problems and have never had a bad couple. The hitch indicator on front of head gives a clear indication of latching condition, and the latch handle has a locking pin for added protection. This pin is the only issue I have had, which can be trapped under the slide plate if your truck is at an angle (beyond about 35 deg) from the rv. I make it a point to pull this pin prior to backing if I am the least bit concerned. This is a great hitch! Excellent quality and it's made here in America.
# 6
Reese M5 5th Wheel Trailer Hitch - Single Jaw - 20,000 lbs
Tried to install this on a 2001 Chevy Silverado 3500, dual rear wheel, long bed, 4x4, diesel engine truck. The clamp style mounting simply does not work. The ONLY way I can see this working is by drilling added holes in the frame of the truck at the front end of the side plates. This is because of a bend in the frame at the clamp location. Also at this location the frame is boxed in and any bolt holes will be hidden. Bolts would have to fished in with bolt wires.
I am very pleased with my purchase of the Reese M5, a major improvement over my old receiver. Great service from etrailer as well.
# 7
B&W Companion OEM 5th Wheel Hitch for Chevy/GMC Towing Prep Package - Dual Jaw - 20,000 lbs
I have a 2018 GMC 3500 6 1/2 foot bed with the factory fifth wheel prep package. I just bought this fifth wheel hitch and towed with it once but it fits perfectly and tows beautifully, is very well built and is USA made. MAGA!! I have it set over the axle and have plenty of clearance because of the tapered front cap on my trailer. No bucking of jerking like the Reese titan hitch I previously had although it was on a slider. Awesome hitch don't hesitate to buy it.
6000 miles towing this year; loaded trailer weight 16,480 lbs (based on CAT scale weight tickets). Hitch is awesome. Very secure with no noticeable chucking. I can remove and install this hitch by myself. The two pieces are very manageable. My fifth B&W hitch over the years; 2 turnover ball goosenecks and 2 tow & stows. Quality hitches which I recommend highly.
# 8
B&W Companion 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
I have a 2018 GMC 3500 6 1/2 foot bed with the factory fifth wheel prep package. I just bought this fifth wheel hitch and towed with it once but it fits perfectly and tows beautifully, is very well built and is USA made. MAGA!! I have it set over the axle and have plenty of clearance because of the tapered front cap on my trailer. No bucking of jerking like the Reese titan hitch I previously had although it was on a slider. Awesome hitch don't hesitate to buy it.
I wanted to be able to easily utilize my truck bed and this hitch provides that in spades! Easy to remove and install. I absolutely have to give a shout out to Paula on customer service. She was amazing! My first shipment was damaged and missing a vital part. Paula had another one shipped right away and made my return shipment a breeze. She stayed in contact with me to the end. I felt like she shared in my joy once the install was complete! The hitch is super adjustable for optimal placement in the bed and height of the trailer. Make a few quick measurements and it just goes together quickly. Love the dual jaw release lever. Our last 5th wheel hitch had the standard pull to release lever and it was often very difficult to operate. This lever style is a game changer. Overall, I couldn't be more pleased with the product and customer service!
# 9
Curt Q20 5th Wheel Trailer Hitch - Dual Jaw - 20,000 lbs
So far, so good. Easy to install in the Titan XD with gooseneck prep kit. I’ll let everyone know how it hooks up and pulls, but I expect no issues.
Received an E-mail 5 days ago saying it was still on back order and would be notified when they received them and were shipped. Received E-mail yesterday that I had received my order. Found the boxes on front porch. Some rips in the boxes, but no damage to the hitch. UPS may be unhappy since I wasn't home and he had to carry it up a flight of stairs. Hitch is much heavier than my B & W. Took about 5 minutes to assemble and install in Nissan Titan XD with pucks. Too much ice and snow to use yet. Removed it from truck in about a minute. Way faster than my B & W turnover. I'll update review after I tow with the hitch.
# 10
Reese M5 5th Wheel Trailer Hitch for Chevy/GMC Towing Prep Package - Single Jaw - 20,000 lbs
I recently purchased a Reese M5 20K hitch for my new Silverado 3500HD, Crew Cab, 8’ bed. As usual, Etrailer pricing was very good and with free shipping to boot. The hitch arrived via UPS in just a few days after placing the order. Following the detailed instructions provided by Reese, the install into the factory “puck” system, was fairly straight forward. However, a word of caution concerning the install. There are 4 15/16” bolts that need to be torqued to 220-foot pounds and are somewhat difficult to get to. Fortunately, I was able to borrow a torque wrench that would accommodate the recommended foot pounds of torque. Also, you may have an issue if you need to place the hitch at its highest position. The release handle might protrude above the bed rails of your truck in this position. This will be a problem if you have a bed cover. Reese is/was well aware of this issue and sells an after-market handle that will correct this issue. Etrailer lists this handle on their Web page.
Installed in a 2018 GMC 3500 LB SRW Overall it was really easy to put together. Its light enough move in and out and very sturdy. I did not have a clearance issue with the Backflip cover regarding the stock handle. See pics. Just a heads up, I had an issue with the threading in the legs, etrailer was very understanding and sent me out replacements supper fast. I contacted Reese regarding paint guncked up in the threading and they were aware of the issue, they recommended running a wire brush or a tap to clean it out.
What our customers are saying:
"Thanks for the fast service and great technical service. I would have had to drive all over town to find these items, but didn't have to leave home!"