Most Popular Trailer Connectors for 2008 Jeep Wrangler

7 pin connector separated from cable. I was expecting that "Molded Cable" meant that the connector was fused to the cable insulation but instead, the two separated almost immediately after I installed it. It still works fine as the wires are connected securely inside the connector but with the outer covering pulled out like this, I don't think it will last very long.

Click to Enlarge

Çable good but after putting new 7way plug on truck cable wire colors did not match etrailers picture

Heavy duty spring lock will keep the cord where it belongs. Easy install.

Great service, shipment made timely

Can be a little tricky to get the wires clamped in the back of the plug but once installed on the wire, works as it should, and good quality

on time delivery

Always a good product at Etrailer.com and informative write up and videos

Just what I needed. ETRAILER Rocks !!!!!

Easy to wire up and I prefer a metal case versus’ any plastic type. I also have the metal receptacle on my Jeep Wrangler.

Great service, shipment made timely

I found what I thought I needed on the website to prepare our car to be flat towed, but wanted to call to verify. After a short phone call, eTrailer saved me about $50 and got me the stuff I actually needed to get the job done! I won’t shop anywhere else!

Installed: 9/12/2013 Jeep Wrangler Unlimited Installation of the plug was a quick and easy. The existing Warrior hitch has a tab on the side for a trailer wiring socket. Drill a new hole on the installation bracket (comes with the trailer connector) so the bracket on the hitch matches bracket on the trailer connector. Done deal. This is the only trailer connector I found which has the 7, 5 and 4 connector options. Flexibility is always a good idea when you are borrowing someone else trailer or renting.

Click to Enlarge

the perfect plug for mt Wrangler tj

Great product and thanks to etrailer.com for the excellent videos detailing how to install the Demco Stay-In-Play Duo braking system. As a result of watching all of the available videos, I learned that there where a couple of different ways to install the system in our Jeep Wranglers. The first installation I did was in our 2019 Wrangler and that was super easy following the one video on your website. The second installation of the system was not as easy because our 2021 Wrangler has a manual transmission and required having to drill a hole in the firewall/floor board to run the wiring and vacuum tube from the passenger compartment to the engine area. If etrailer.com ever has an installation on a Jeep Wrangler with a manual transmission to perform, hopefully they will video tape that installation to guide customers with Jeeps with manual transmissions. I think etrailer.com's idea of mounting the control box on the fuse box is by far the cleanest and easiest way to install the Demco braking system. I also followed etrailer.com's videos for installing the brake light system and the base plate on both our Wranglers and could not be happier with them. Thanks etrailer for all you offer.

Worked great on my 2019 wrangler JL , very easy to install

Quick ship, exactly as described. I buy from etrailer all the time

Good prices,free shipping($99.00+)good products as listed, what more can you want!

Wiring worked perfect for my project. I replaced the wiring on my 14 foot utility trailer. If I was to do it again I would buy the next length up. I would have liked to have a little extra wiring if I was to ever need it.

Your sales staff is second to none. Keep up the good work. You shipped minutes after I placed my order! Very impressed! Marty

Well I wasn't able to use this as there was no good place to install on my car without it practically dragging. Not a product problem at all. I tried to return and customer service was fast and super helpful... unfortunately return shipping would eat up any refund. So.. I get to keep it. good quality and product. Very happy with it and wish I could use it. Will keep it for sometime in the future when of course I will need it.

I bought this socket for my 2006 Volvo Xc90 to wire in the 4-Pole harness I also purchased from etrailer. Already had a few 7 Blade to 4-Pole adapters from my previous vehicle, and wanted the option of adding a trailer brake wire for a small camper later on so that was the main reason for the purchase. It also went very well with the Hidden Hitch I had already installed, bracket mounted right up to the existing tabs on the hitch. Super quick and easy install, as all of my etrailer purchases have been. Looks great on the truck, and functions great with the 180 Degree cover.

Click to Enlarge

Click to Enlarge

Click to Enlarge

Product arrived on time and as described. I used this for setting up our 2014 Wrangler Unlimited Sahara for a flat tow. Mounting hole spacing @ 2" o/c didn't match our Blue Ox 1126 draw bar so I fabricated my own intermediate bracket, polished it to aircraft tooling standards, then lacquered it before final assembly. I think the finished product came out nice.

Wiring harness and flat tow bracket to be able to tow our new Wrangler behind our motorhome. Product arrived on time and everyone was most pleasent to deal with. had the bracket installed by the dealre we bought the Wrangler from as part of that deal and then did the wiring ourselves. Pretty weasy thanks to the excellent video provided by etrailer and it took us rookies about 3 hours to complete. we are very happy with the service and product. Thanks to all. Regards,

Nice

Only gave 4 stars because it was a bit confusing. I have a lot of auto wiring experience; from car stereos,amplifiers and all manner of accessories. All of the info on etrailer indicated that the color coding didn't match up. So I went into it disregarding the standard color coding, when in fact it was just as it should be.

Overall, I was very impressed by this connector. I used it as an in-bed connector for my gooseneck trailers. The plug seems to be a quality product, engineered to stand up to some abuse. I like how the mounting bolt heads recess into the connector and also how the bottom of the connector is elongated to help support the weight of the plug and wiring. I think it has a great shot at lasting for a very long time. The hinge is predominately plastic that will not corrode and break like the many I've had in the past.

Click to Enlarge

I upgraded my trailer from hydraulic to electric brakes and rewired everything to neaten and freshen up things. Its a nice piece. I recommend.

The overall quality of the cable is impressive

We just finished a makeover of our 1995 boat trailer. New bunks, sanded and painted but the best part of the project was the new LED lights from your company. They are so much brighter than the old incandescent bulbs that you really do feel safer driving down the road. We pulled the 20 year old wire out and replaced with new and used the 3M scotch loks to tie in. We were not sure the new style grommets would fit the old holes in the frame but they fit great. Your customer service was great, alerting me to a backordered reflector but recommended a replacement that worked fine. Patrick set up a Q&A page for me since I had questions about the best way to protect connections with dielectric grease, heat shrink and tape. Your website is one of the best with ease of navigation, complete pictures, great selection and thorough info, dimensions, etc. You guys really have your act together and also offer great value. I would not hesitate to purchase again and will recommend you when I can. I have attached a couple of pictures. Thanks for all your help. Wayne N.

Click to Enlarge

Click to Enlarge

Easy to install and works great.

This product was exactly what I needed to complete the wiring connections between the RV and Jeep Wrangler. Comes with easy instructions and mounting hardware.

appears to be of good quality. Will have a chance to install next week

No surprises...It works.

Great quality

This was easy to install looks great and works excellent. have had on issues with this product my trailer lights are always working and keeping me safe.

Click to Enlarge

Click to Enlarge

Installed a Blue Ox Base Plate kit on a 2015 Cadillac SRX. The base plate arrived promptly and was well packaged considering its weight. Watched the videos etrailer provides and used them as a step by step video guide. The videos were a big help. Installation is not too difficult if you're mechanically inclined. Had someone help with the installation but one person can perform the installation. I think the base plate is well engineered and everything fit as it should. Love the fact the installation is so well hidden. We have about 400 miles on the installation and have had no issues. Thanks to etrailer for a great price, great service, and great product support.

Not using on a trailer, but making disconnect harness for quick attach snowblower to loader arm. Connection cord is 7 pin tractor trailer tether, Worked well.

Click to Enlarge

Product is high quality & works great! Can't beat etrailer